- Joined
- May 26, 2016
- Messages
- 1,318
- Reaction score
- 1,391
- Location
- Seattle, US
- What state or country do you live in
- Washington
From what I found, the rule of thumb for calculating head pressure from plumbing is 1 foot per 90 degree, and per 10 feet pipe length.
My return pump has max head of 14 ft. I have 11 elbow and about 9 ft pipe in the return line, plus 4 ft height difference. If that rule is right to any extend, it should get almost no flow even at max. But the reality is, it push plenty of flow at 50%.
So, is there a better way to estimate flow rate without a flow meter?
My return pump has max head of 14 ft. I have 11 elbow and about 9 ft pipe in the return line, plus 4 ft height difference. If that rule is right to any extend, it should get almost no flow even at max. But the reality is, it push plenty of flow at 50%.
So, is there a better way to estimate flow rate without a flow meter?
