Extreme phosphate consumption.

Would it be great if we had some kind of calculator that would make it easy for reefers to do their own math and stoichiometry 🤣

The problem is knowing the available surface area.
 
Preferred dose = 10mL = 0.01L
Desired ppm such that 10mL in your tank increase PO₄ by 1mg/L (≈ 1ppm):
1mg/L · (284L + 0.01L) / 0.01L = 28,340mg/L = 28.34g/L​
Naâ‚‚HPOâ‚„ contains 1mol POâ‚„.
Molar mass of PO₄ ≈ 94.97g/mol
This means 28.34g POâ‚„ are roughly 0.2984mol:
28.34g PO₄ / M(PO₄) ≈ 28.34g / 94.97g/mol ≈ 0.2984mol
​
Molar mass of Na₂HPO₄ ≈ 141.957g/mol

0.2984mol Naâ‚‚HPOâ‚„ are roughly 42.36g Naâ‚‚HPOâ‚„:
0.2984mol · 141.957g/mol Na₂HPO₄ ≈ 42.36g Na₂HPO₄
​
Take 42.4g Na₂HPO₄ (anhydrate) and dissolve it in 1L RO/DI to get a solution with 28,340mg/L PO₄. 10mL of that solution contain 283.4mg PO₄. If you add 283.4mg PO₄ into 75gal (284L) you end up with roughly 1mg/L ≈ 1ppm PO₄.
 
The problem is knowing the available surface area.
I think Fish Fan meant for creating the stock solution. My previous approximation of phosphate adsorption is (like I said) a very rough approximation and an upper limit. But a customized stock solution for phosphate dosing is easy enough 😊
 
I think Fish Fan meant for creating the stock solution. My previous approximation of phosphate adsorption is (like I said) a very rough approximation and an upper limit. But a customized stock solution for phosphate dosing is easy enough 😊

I’ve always recommended the James Planted tank calculator, but it may not still be available.
 
I think Fish Fan meant for creating the stock solution.
Yes this, and I was just joking a little with Enter Name 🤪

Please carry on 🙂
 
Preferred dose = 10mL = 0.01L
Desired ppm such that 10mL in your tank increase PO₄ by 1mg/L (≈ 1ppm):
1mg/L · (284L + 0.01L) / 0.01L = 28,340mg/L = 28.34g/L​
Naâ‚‚HPOâ‚„ contains 1mol POâ‚„.
Molar mass of PO₄ ≈ 94.97g/mol
This means 28.34g POâ‚„ are roughly 0.2984mol:
28.34g PO₄ / M(PO₄) ≈ 28.34g / 94.97g/mol ≈ 0.2984mol
​
Molar mass of Na₂HPO₄ ≈ 141.957g/mol

0.2984mol Naâ‚‚HPOâ‚„ are roughly 42.36g Naâ‚‚HPOâ‚„:
0.2984mol · 141.957g/mol Na₂HPO₄ ≈ 42.36g Na₂HPO₄
​
Take 42.4g Na₂HPO₄ (anhydrate) and dissolve it in 1L RO/DI to get a solution with 28,340mg/L PO₄. 10mL of that solution contain 283.4mg PO₄. If you add 283.4mg PO₄ into 75gal (284L) you end up with roughly 1mg/L ≈ 1ppm PO₄.
Hey! I actually ended up with sodium phosphate dibasic Anhydrous. Can you help me with that solution?
 
Hey! I actually ended up with sodium phosphate dibasic Anhydrous. Can you help me with that solution?
No problem!

Disodium phosphate = Sodium phosphate dibasic = Disodium hydrogen phosphate

So the recipe won't change, it's just a different name for the same chemical.
On the package you should find:
"Naâ‚‚HPOâ‚„"
"CAS 7558-79-4" or
"E399(ii)"

Make sure to store the reagent in a well closed (preferably fully air-tight) bag and a dry space. The anhydrate is hygroscopic and will start to hydrate over time so measurements at a later point will be less precise. In theory you can dry it at a later point at 105°C (221°F) for 4 hours, but to be honest: It won't matter too much you will have to keep measuring phosphate anyway.
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 19 25.3%
  • I’d trust someone who knows my tank to choose

    Votes: 6 8.0%
  • I’d rather get a gift card and pick it myself

    Votes: 28 37.3%
  • I’d prefer gear or supplies instead

    Votes: 2 2.7%
  • Please don’t surprise me with livestock

    Votes: 20 26.7%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new