Extremely stable salinity reading?

  • Thread starter Thread starter Seadoc
  • Start date Start date
  • Tagged users Tagged users None

Seadoc

Active Member
View Badges
Joined
Apr 14, 2019
Messages
258
Reaction score
227
Rating - 0%
0   0   0
For the past 4 weeks, the salinity probe is giving a flat reading on the system. Although it reads 36.1, the salinity in the system is 35ppt (refractometer). Besides needing calibration, is there normally no variance in the reading?
salinity.jpeg
 
I am not a apex expert by any means, but that seems wrong to me. Mine fluctuates .1 ppt constantly. Is this a new apex? A apex that has been running for a while?
 
Being that it's technically a conductivity meter, and not really actually a salinity meter, I have noticed mine moves up and down with when the heaters turn on and off. So that really seems odd
 
Being that it's technically a conductivity meter, and not really actually a salinity meter, I have noticed mine moves up and down with when the heaters turn on and off. So that really seems odd
Interesting. No fluctuation at all in my readings. The new Apex was setup around 2 months ago. After initial callibration, salinity measured 36.2 and at some point went to 36.1. I plan to dry and recalibrate this weekend......
 
Interesting. No fluctuation at all in my readings. The new Apex was setup around 2 months ago. After initial callibration, salinity measured 36.2 and at some point went to 36.1. I plan to dry and recalibrate this weekend......

Before you re-calibrate it, maybe unplug the probe, and then plug it back in, make sure it's in the whole way, wait a couple of min's then re-calibrate it. If that doesn't work, being that it's only 2 months old, I would contact neptune systems.
 
Before you re-calibrate it, maybe unplug the probe, and then plug it back in, make sure it's in the whole way, wait a couple of min's then re-calibrate it. If that doesn't work, being that it's only 2 months old, I would contact neptune systems.
Great idea. I'll give it a shot.
 
Before you re-calibrate it, maybe unplug the probe, and then plug it back in, make sure it's in the whole way, wait a couple of min's then re-calibrate it. If that doesn't work, being that it's only 2 months old, I would contact neptune systems.
That worked like a charm! Thanks for the advice.
Will monitor in the next few days and see what readings it shows.
 
That worked like a charm! Thanks for the advice.
Will monitor in the next few days and see what readings it shows.

Glad it worked. That connector is more likely to not be in the whole way or get bumped out. As it does not lock in like the other probes. Happy reefing.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new