Feed ABCD mode questions

[Heres_doe_]

I got something setup for feed mode a. My thing is can I use the same equipment still and setup them up for multiple different feed modes?

 

[SuncrestReef]

You can program any output to respond to any of the 4 Feed modes. Read my tutorial on Apex Feed Cycles for details and example code:

Neptune Apex Programming Tutorials Part 7, Feed Cycles

How to program Neptune Apex for Feed Cycles.

www.reef2reef.com

Let me know if you have something specific you're trying to do.

 

[Heres_doe_]

Ok so i have a few things go off for feed a for 20 minutes. Feed a says 300 seconds (5 minutes) would those things stay off a total of 25 minutes or would they still be off only 20 minutes

 

[Heres_doe_]

You can program any output to respond to any of the 4 Feed modes. Read my tutorial on Apex Feed Cycles for details and example code:

Neptune Apex Programming Tutorials Part 7, Feed Cycles

How to program Neptune Apex for Feed Cycles.

www.reef2reef.com

Let me know if you have something specific you're trying to do.

One last thing can i also get a graph on the home screen like the one for parameters for phosphates and nitrates

 

[SuncrestReef]

One last thing can i also get a graph on the home screen like the one for parameters for phosphates and nitrates

Unfortunately, those graphs are not available as dashboard tiles. Only graphs produced by probes, flow sensors, Trident, DOS, or amp meters are available on the dashboard.

 

[Heres_doe_]

Unfortunately, those graphs are not available as dashboard tiles. Only graphs produced by probes, flow sensors, Trident, DOS, or amp meters are available on the dashboard.

Ok well thanks a ton I've figured out what i was trying to do and everything works great