First ICP Test Results

[Scuba Mike]

I have just had the first test on my 80 gallon (actual water capacity) tank that has been up for 1.5 years and started with 10yr old live rock. I have just started to run RowaPhos in a filter bag and that has dropped Phosphates. The tank is LPS/Softie so no dosing of Calc, but I am dosing 30ml of Sodium Bicarb. I have a small fuge with Chaeto. I feed 3+ cubes per day to a heavy fish load. Coralline algae started growing months ago. No real problems except high nitrate and phosphate. With the old rock the tank really never had an ugly phase and no nuisance algae problems. I use Tropic Marin Pro Salt.

Current parameters tested with Hanna and Saliforte test kits,
Alk 8.3 working to stabilize this at 9
Phos .13 ~ .25 working to lower this
Calc ~ 440 stabile
Salt 1.025
Nitrate 10 - Stable
PH 8.3
Temp 78.5
What is the best way to handle the items in the red? Iron, aluminum, nickle, etc?

Is there a better/preferred way to post results? I attached report as well.

CALCULATED PARAMETERS​

	UNWANTED HEAVY METALS	ANALYSIS	SETPOINT
Hg	QUICKSILVER	0 µg/l	0 µg/l	▲
Se	SELENIUM	0 µg/l	0 µg/l	▲
Cd	CADMIUM	0 µg/l	0 µg/l	▲
Sn	TIN	0 µg/l	0 µg/l	▲
Sb	ANTIMONY	0 µg/l	0 µg/l	▲
As	ARSENIC	0 µg/l	0 µg/l	▲
Al	ALUMINIUM	214 µg/l	0 - 60 µg/l	▲
Pb	LEAD	0 µg/l	0 µg/l	▲
Ti	TITANIUM	0 µg/l	0 µg/l	▲
Cu	COPPER	0 µg/l	0 µg/l	▲
La	LANTHANUM	0 µg/l	0 µg/l	▲
Sc	SCANDIUM	0 µg/l	0 µg/l	▲
W	TUNGSTEN	0 µg/l	0 µg/l	▲

	MACRO-ELEMENTS	ANALYSIS	SETPOINT
Na	SODIUM	10408 mg/l	10000 - 11300 mg/l	▲
Ca	CALCIUM	400 mg/l	415 - 520 mg/l	▲
Mg	MAGNESIUM	1288 mg/l	1320 - 1500 mg/l	▲
K	POTASSIUM	382 mg/l	380 - 480 mg/l	▲
Br	BROMIDE	53 mg/l	62 mg/l	▲
B	BORON	4.099 mg/l	4.5 mg/l	▲
Sr	STRONTIUM	7.079 mg/l	8 - 12 mg/l	▲
S	SULPHUR	886 mg/l	900 mg/l	▲

	LI-GROUP	ANALYSIS	SETPOINT
Li	LITHIUM	185 µg/l	200 µg/l	▲
Ni	NICKEL	9.201 µg/l	5 µg/l	▲
Mo	MOLYBDENUM	11 µg/l	12 µg/l	▲

	I-GROUP	ANALYSIS	SETPOINT
V	VANADIUM	0 µg/l	0 - 3 µg/l	▲
Zn	ZINC	18 µg/l	0 - 5 µg/l	▲
Mn	MANGANESE	1.676 µg/l	0 - 3 µg/l	▲
I	IODINE	22 µg/l	30 - 90 µg/l	▲

	FE-GROUP	ANALYSIS	SETPOINT
Cr	CHROMIUM	0 µg/l	0 µg/l	▲
Co	COBALT	0 µg/l	0 µg/l	▲
Fe	IRON	6.928 µg/l	0 µg/l	▲

	BA-GROUP	ANALYSIS	SETPOINT
Ba	BARIUM	18 µg/l	0 - 10 µg/l	▲
Be	BERYLLIUM	0 µg/l	0 µg/l	▲

	SI-GROUP	ANALYSIS	SETPOINT
Si	SILICON	112 µg/l	0 - 200 µg/l	▲

	NUTRIENT-GROUP	ANALYSIS	SETPOINT
P	PHOSPHORUS	53 µg/l	6 - 23 µg/l	▲
PO4	PHOSPHATE	0.16218 mg/l	0.018 - 0.07 mg/l	▲

 

[Scuba Mike]

Bump

 

[Randy Holmes-Farley Verified Community Expert]

Aluminum looks quite high. Are you using any white media?

Nothing else jumps out at me as a concern.

 

[Andreaitaly]

Aquaforest Life bio fil can be source of alluminium because i have some problem hi High AL .....thanks

 

[Randy Holmes-Farley Verified Community Expert]

Aquaforest Life bio fil can be source of alluminium because i have some problem hi High AL .....thanks

I don't know since I cannot tell what it is made of.

How high is your aluminum?

 

[BZOFIQ]

Aluminum looks quite high. Are you using any white media?

Nothing else jumps out at me as a concern.

What's the best way to remove excess aluminum?

 

[Andreaitaly]

But 3 months ago

 

[Randy Holmes-Farley Verified Community Expert]

But 3 months ago

What is the number? 0.07 ppm? That's not a huge problem, IMO.

 

[Andreaitaly]

I used gfo and wc 10 %a week

 

[Andreaitaly]

But they put out of limit

 

[Scuba Mike]

Aluminum looks quite high. Are you using any white media?

Nothing else jumps out at me as a concern.

Thank you for the review Randy. I have a couple of the white bricks and they se soft
I cut them to fit with my pocket knife. Thoughts on strontium, iodine and iron?