FishFace NJ build

Have you tried dosing Brightwell Purple M? I purchased some when it was released and I will tell you in my experience I do see a cleaner sand bed, clearer water, happier corals and slightly lower nutrients. So I dose as directed for initial dose. Then I dose 1 capful weekly after that.
 
When it smells like 💩. Generally it will only last a week or 2 in fridge. I don’t care what they say that is what I experienced
If it smells like 💩 it’s already in the trash !
 
Last edited:
Yummy... 😉 🙂
20260925_235729.jpg
 
Sand is 98% clean. I didn't clean the cyano from the sand against the tank glass. I hovered my hose and sucked out the cyano that was on top of the sand bed. A lot of sand stuck to the cyano mat. Emptied and refilled my ATO container. I will start the change out of the ATI T5 8 bulbs tomorrow.



IMG_1893.jpeg
 
Last edited:
To be honest I dosed varieties of live phyto some time ago for almost a year and saw no benefit to doing so. It became quite expensive to purchase and I was not willing to cultivate my own. That’s my truth and I’m sticking to it. I will tell you that during my time using it I did notice an uptick in algae blooms. Nothing crazy and could have been a coincidence.

I purchased pods with phyto April, July and Aug. I am not motivated to culture my own pods and phyto. The wrasses wipe out the pods quickly. I will stop with the phyto.
 
Have you tried dosing Brightwell Purple M? I purchased some when it was released and I will tell you in my experience I do see a cleaner sand bed, clearer water, happier corals and slightly lower nutrients. So I dose as directed for initial dose. Then I dose 1 capful weekly after that.
I will try it.

I have tried Hydospace ProBio which I think is the same thing. They are both PNSB

​

 
Last edited:
Woke to find my sand was moved by the powerhead. I lowered the two heads by 3 inches. I was attempting to get more flow on the sand.

In the photos I took this morning, you can see the poop 💩 gathering on the sand in the mid and back area.

I have to unbox a Tunze ORCA. Not sure where to place it.



IMG_1894.jpeg

IMG_1897.jpeg

IMG_1896.jpeg
 
I like to keep my wave makers up high for surface agitation. Doing so not only agitates the top but forces water to hit the opposing side creating wave to flow down and across bottom. I have 2 RS reef waves at opposite ends of tank running alternating waves so one runs for a few seconds lowers down then the opposite side runs so back and forth creating reef type natural flow. Sand bed is clean. Do I have dead spots yes I’m sure but short of creating a tsunami in my tank just for some fish crap is not a worry. The bacteria will eat it. 🤤
 
Aug 27, 2019 Hi! I am Diana. I am a new/old member on here. I signed up for my own account today. I had been sharing my son's account since he signed up some time ago. I have been reef keeping since 1995. I had upgraded to a 90g and then my son @DaveNJ wanted my 90g. So I bought a 40b and had been using that for 3 years. This past May I lost all of my corals due to a salt issue. I have been an avid Red Sea Pro user. I bought (2) 200g boxes of a different brand from a group buy. The first box elements were fine. When I got to the second box of this different brand, I had no idea that the elements were off drastically. I never thought that besides testing with my refractometer that I should test my elements with a new batch of salt. I did a water change with the salt and got my salinity to 35. Day 2 I see corals acting oddly. Check salinity and it's spot on. By day four my corals were died. After this craziness I thought of checking all the elements. I found them either extremely high or low. I was in shock. I then checked the batch of left over saltwater mix that I had used for the water change....same results..they were off extremely. I then mixed up another batch to 35 salinity, and got the same results yet again. I will never go back to this brand, and will stick with Red Sea Pro. I am currently upgrading my 40b to 75g. I like the water volume of the 90g but hate the depth of 90g. I would love a 90g that is the height and length of the 75g but deeper. My new 75g tank will be coming from @Aquarium Care Center llc here in NJ. The owner John and his crew are great! The 90g and 40g I had been using a Fluval FX6. This will be my first go at a sump. I decide to try my hand at a sump kit. I was afraid that once I filled the tank with water, the acrylic baffles would expand and crack the tank. I ran it for two days with no problems. I will be on my way back to @Aquarium Care Center llc now that I didn't have an issue with the sump build, I will be back to see John. I have been slowly building my corals again. I had lost a total $1092.82 from the salt issue. Here are a few shots of what I currently have.....

sump kit.png



Oct 16, 2023
1774627667163.png

1774627929003.png
IMG_7520.jpeg

1774627947223.png



Sept 25, 2025
1774642233769.png
IMG_8285.jpeg



......................................................

Oct 15, 2025 New Build https://www.reef2reef.com/threads/fishface-nj-build.643019/post-13933664 Jump to new build

Tank: 150 gallon
Overflow: Bean Animal Modular Marine 1600
Stand: AluFab T-Slot
Light: ATI T5 with Orphek OR4 bar and RB Meridian Edge (not installed yet)
Pump: Jebao MDP-10000 DC
Powerhead: (2) Jebao DMP-40
ATO: Tunze 3155 ATO
ATO Reservoir: Red Sea ReefCan 10.6 gal.
Skimmer: Reef Octopus Classic150 Int
Filtration: 60g breeder; Filter Socks
Heater: x2 titanium heaters
Rocks: 80lbs (roughly) of KP Aquatic live rock in sump
Sand: Tropic Eden Reeflakes 120 pounds
Chemistry:
Salt: Instant Ocean
KZ Flatworm Stop
KZ Coral Snow
KZ Cyan Clean
Miracle Mud Refug Media 20LB Removed 4/18/26
AF Life Source
Fishes:
Radiant Wrasse - Stymie
Yellow Wrasse - Spanky
(2) Leopard Wrasses
Regal Angelfish - Wile E. Coyote
Midas Blenny - Casper (the friendly ghost)
Firefish Exquisite
It looks amazing!!!
 
Good morning Diana, I’m not knowledgeable on your full livestock list so this might not pertain to your situation. I never have to clean my sand as it always looks clean thanks to my
nassarius snails, cerith snails, 3 conches and my sand sifting gobies and current up high. I previously had a diamond goby and now these two twinspot gobies since I upgraded this year.
 
Good morning Diana, I’m not knowledgeable on your full livestock list so this might not pertain to your situation. I never have to clean my sand as it always looks clean thanks to my
nassarius snails, cerith snails, 3 conches and my sand sifting gobies and current up high. I previously had a diamond goby and now these two twinspot gobies since I upgraded this year.

Learned something today. I thought that Diamond Watchman goby were the only sand sifters. LiveAquaria has the Twin Spot listed as difficult and Diamond as easy. Do you know why the care level is different? Are your Twin Spots mated?

Maybe I shouldn't have bought the Tunze ORCA.
 

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 15 21.4%
  • Powerheads or wavemakers

    Votes: 5 7.1%
  • Sump or rear filtration chambers

    Votes: 9 12.9%
  • Skimmer or other filtration equipment

    Votes: 9 12.9%
  • Overflow or plumbing

    Votes: 12 17.1%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 19 27.1%
  • Other—tell us what I missed

    Votes: 1 1.4%
Back
Top
Home
Post thread…
Market
What's new