Steven Garland
Valuable Member
Rapidled sold one awhile ago,it was like $30 but they stopped selling it..
General DIY LED thread
- Thread starter Kampo
- Start date
- Tagged users None
Steven Garland
Valuable Member
Are you saying that about my comment lol ?
Steven Garland
Valuable Member
Reefll has some too but basically stopped selling 90% of their leds and arrays 
;Shifty
Okay so seeming LedSupply uses Semi's I guess the only option would be to buy a blank star and reflow some Semi's in ;Facepalm
;ShiftyOkay so seeming LedSupply uses Semi's I guess the only option would be to buy a blank star and reflow some Semi's in ;Facepalm
Last edited:
I picked up a used ocean revive light that has some of the leds out. Thought that I would just do a recolor while I was at it. What colors would you replace and with what? below is the stock colors. I believe they are bridgelux leds.
thanks
Jeff
thanks
Jeff
I picked up a used ocean revive light that has some of the leds out. Thought that I would just do a recolor while I was at it. What colors would you replace and with what? below is the stock colors. I believe they are bridgelux leds.
thanks
Jeff
I’d drop more of the whites for RB or violets, depending what you can get.
Steven Garland
Valuable Member
I would definitely drop the 10k and 12k whites with 3k-5k whites and royal blue,replace the green and red with whatever else. Maybe take a few blues out on the blue channel and pop a few violets in space.
Steven Garland
Valuable Member
How well do you guys think a 12" Makers Slim sink with 2x NanoBox 11up's with 3 3up's in the middle 11ups towards the ends of the sink would be enough for a IM peninsula 14 ? :
(#1 channel 5x nw,6x ww,2x cyan,2x mints,4x violets)
(#2 channel 14x royal blue,4x true blue,6x violets)
(#1 channel 5x nw,6x ww,2x cyan,2x mints,4x violets)
(#2 channel 14x royal blue,4x true blue,6x violets)
OP
OP
Kampo
Active Member
way more light than I run over my simlar sized cube. (I have reasonable growth with a single 8led acrostar running at 700ma) so should be more than fine. honestly wouldn't worry about the 3 3ups.
look into this heatsink https://www.stevesleds.com/HD-Heatsink_p_334.html wouldn't need fans, and its cheaper. a 12in one would be perfect I think. if you want a little more royal blue just add in a couple luxeon Ms (cheaper than 3ups)
Steven Garland
Valuable Member
Well I already have the 3ups and the 11up arrays won't fit inside those sinks. The plan would be full blown sps tank,with those leds I should have evenly spread spectrum and par.
OP
OP
Kampo
Active Member
keep in mind with that much on that light you will need a fan. its the thing I don't care for on the makers slim, don't do a good job disapaiting heat. look into the 12in rapidled heatsink it is a little nicer looking with a fan on it.
Steven Garland
Valuable Member
I'm not too worried about the fan,I have a bunch of them and can figure out a way to get a fan to not look like crap lol
Agree on the slim: not enough surface area to cool by convection alone, and it’s not designed for a top mounted fan. You could use a blower on the interior, but again are bitten by surface area.
Steven Garland
Valuable Member
I guess I could run 2x Makers Basic 2up's with 700mah LDD's,and 2 smaller 48v power supplies and I will have 4 channels or control.
CH1- 8 Royals,4x True Blue's
CH2- 5 NW,6 WW,2Cyan,2 Mints
CH3- 8 Violets (400-430)
CH4- 3 3up's (6x RB,2 WW,1 NW)
CH1- 8 Royals,4x True Blue's
CH2- 5 NW,6 WW,2Cyan,2 Mints
CH3- 8 Violets (400-430)
CH4- 3 3up's (6x RB,2 WW,1 NW)
OP
OP
Kampo
Active Member
the fans from beamswork aquarium lights are the ticket I found. they slide into the channels on top of the light. run on as little as 5v and are quiet at that voltage, above 7v they are noisy though. here is one on my nano.
the makers 2up aren't the best bang for buck imo. look at stevesled or other 5up boards, cheaper and I think in a better formfactor. or heck don't nessesarily need the boards, for most of my lights I've just gotten the ldd-ds or ldd-h with wires and superglued the ldds to the heatsink in a neat row and wired them up. prolly cools them better too.
Steven Garland
Valuable Member
I feel like it would be though,although they will both be relatively close in price. If I choose pwm I would need the:
Storm or Hurricane ($75 with the case)
4up Coralux Board ($15)
4x LDD'S ($25ISH).
PSU TBD
Makers 2up ($40 for 2)
4x LDD's ($25ISH)
2 MW LRS 48v/100w PSU's $33 or 1 BIG PSU.
I guess the rest comes down to personal preference really
Storm or Hurricane ($75 with the case)
4up Coralux Board ($15)
4x LDD'S ($25ISH).
PSU TBD
Makers 2up ($40 for 2)
4x LDD's ($25ISH)
2 MW LRS 48v/100w PSU's $33 or 1 BIG PSU.
I guess the rest comes down to personal preference really
dantimdad
7500 Club Member
I agree about the makers slims.
I also think the point in a "store bought" solution is to look nice but they just don't once you put a fan on them.
At least not in my opinion.
I also think the point in a "store bought" solution is to look nice but they just don't once you put a fan on them.
At least not in my opinion.
the fans from beamswork aquarium lights are the ticket I found. they slide into the channels on top of the light. run on as little as 5v and are quiet at that voltage, above 7v they are noisy though. here is one on my nano.
the makers 2up aren't the best bang for buck imo. look at stevesled or other 5up boards, cheaper and I think in a better formfactor. or heck don't nessesarily need the boards, for most of my lights I've just gotten the ldd-ds or ldd-h with wires and superglued the ldds to the heatsink in a neat row and wired them up. prolly cools them better too.
Looks like you have a spider on your light [emoji16]
Similar threads
