Ghl vortech controller

[Scdell]

It seems that about every month or so my controller loses connection with the vortex controllers?????? Big pain to reset them. How come?

 

[Ditto]

@Scdell - I had this happening on my 6 foot tank and I fixed it by moving the Vortech controller closer (stuck them all right next to each other) to the GHL Vortech controller.

May not be the same issue, but it did stop after that. I was loosing specifically the Mp60 on the far side of the tank.

 

[Scdell]

Thanks, I was thinking along the same lines. I have a 4 foot tank and have one on each end. If it keeps up I'll try that.

 

[Scdell]

Well three times in the last 24 hours I had to reset the vortech to the controller. I tried to move the vortech controllers next to the p4 controller. Not enough cord. This whole setup was working fine for months. Now it's a problem.

 

[Ditto]

Sorry your having issues suddenly I am now tagging @Vinny@GHLUSA and @Marco@GHLUSA for help.

 

[Vinny@GHLUSA]

Wireless interference could be the issue here.
What is the actual distance between the Vortech driver and GHL Vortech controller?

I would also consider the RF modules in the Vortech...maybe something going on there.

 

[Scdell]

Wireless interference could be the issue here.
What is the actual distance between the Vortech driver and GHL Vortech controller?

One is right next to it. The other is mounted on the other side of the tank. I moved the far one a little closer as I don't have enough cord on the mp40 to get it close to the ghl controller. I have it at the back of the tank and it has not lost connection since I've done that. Did that about 24 hours ago.