Hanna calcium checker help

I sometimes use RODI with no problems
Randy's post implies that the checker gives inaccurate readings if the blank contains very small levels of calcium. I was wonder if he considers the checker to give accurate readings if the blank contains even smaller (or no) calcium.

I'm asking this because I've seen other people insist that the checker is inaccurate regardless of the quality of the blank.
 
The only ppl that complain about the checker are ones that either don't follow direction or just have a hate on for Hanna. Ime it's quite reliable and had never steered me wrong. Distilled water is a good choice as well as RODI if you know the system is pulling out all the Calcium. These are hobby grade and get you in the ballpark.
 
Randy's post implies that the checker gives inaccurate readings if the blank contains very small levels of calcium. I was wonder if he considers the checker to give accurate readings if the blank contains even smaller (or no) calcium.

I'm asking this because I've seen other people insist that the checker is inaccurate regardless of the quality of the blank.

I do not recall seeing a real examination of its accuracy, but the number of folks that have issues with it is seemingly high.

IMO, the issue of calcium in the blank is due to a poor design. The use of only 0.1 mL of tank sample diluted into 10 mL makes the possible calcium in the blank much more significant than if there was more sample and less distilled water.

It also puts a big premium on accurate measurement of that 0.1 mL If you actually dispense 0.095 mL instead of 0.100, which is likely well within expectations, then 420 ppm calcium will read as 399 ppm, even without any calcium in the blank causing issues. IMO, it is easier for a kit using 2 mL of tank water (such as salifert) to get an accurate volume measurement than one using 0.1 mL, but I freely admit that I have not seen an analysis of the sample volume actually used for either one.
 

TOP 10 Trending Threads

WHICH TYPE OF MISTAKE TAUGHT YOU YOUR MOST EXPENSIVE REEFKEEPING LESSON?

  • Moving too quickly or adding too much at once

    Votes: 8 33.3%
  • Skipping—or shortening—quarantine or dipping

    Votes: 5 20.8%
  • Buying the wrong equipment the first time

    Votes: 4 16.7%
  • Ignoring maintenance, warning signs, or redundancy

    Votes: 9 37.5%
  • Chasing numbers or making too many changes

    Votes: 3 12.5%
  • Choosing incompatible fish, corals, or invertebrates

    Votes: 4 16.7%
  • Poor aquascaping or tank-design decisions

    Votes: 1 4.2%
  • Failing to research an animal’s needs

    Votes: 1 4.2%
  • Trusting bad advice

    Votes: 3 12.5%
  • Doing something on the tank when you should've gone to bed

    Votes: 4 16.7%
  • Something else—tell us below

    Votes: 4 16.7%
  • I’m still waiting for my first expensive lesson!

    Votes: 3 12.5%
Back
Top
Home
Post thread…
Market
What's new