Hanna Checker Woes

Freddy0144

Active Member
View Badges
Joined
Jul 5, 2017
Messages
217
Reaction score
181
Location
Littleton Colorado
What state or country do you live in
Colorado
Rating - 0%
0   0   0
Phosphate Test Kits.
So I have been having some issues with my Hanna Phosphate (ulr) checker (I think) so I will run the test and get a result say .34 for example, I will run the same test 3 to 4 more times with the same water samples and I am getting different results each time. for example one night I tested and results were:
  1. .34
  2. .50
  3. .22
  4. .20

So I decided to order a RedSea Phosphate Test kit. tonight when I tested the phosphate from the Hanna was .34 and the RedSea tested between .08 and .10.

I dont expect the same results, but they should be close, further more when I test with the hanna with the same water the results should be the same.
Anybody else having this issue?

In the past I have taken water to the LFS but they use one of those all in one checkers and the results are so far off in every category I found it not to be reliable.
 
Just a couple of things to note

Check the reagent for expiration.
Make sure the vials are free of finger prints
I make sure the 10ml marking face the same way every time.
I make sure I empty the entire reagent into the vial
I store and clean the vials with rodi.


That said mine is super solid and consistent every time.


Maybe try new box of reagents
 
Just a couple of things to note

Check the reagent for expiration.
Make sure the vials are free of finger prints
I make sure the 10ml marking face the same way every time.
I make sure I empty the entire reagent into the vial
I store and clean the vials with rodi.


That said mine is super solid and consistent every time.


Maybe try new box of reagents
I do all of those things, including storing them in RODI which I know most folks dont do. the vials are cleaned with a cloth each time they are placed into the checker only handling the black lid. and I do my best to get all of the reagent into the vial (that being said, I am testing with the same samples and getting different readings. I would understand if I was running a new test with new reagent there could be an issue)
 
I have not, the checker is brand new as of June.
Ok, it could still be off new from the factory and it does have allowable tolerance +/- but also are you shaking for 2 min and holding when flashing c2 untill the timer comes on for 3 minutes? And are you using every spec of reagent for your test? If all that's a yes and the calibration checks out I don't see why the Hanna would be so far off.
 
Ok, it could still be off new from the factory and it does have allowable tolerance +/- but also are you shaking for 2 min and holding when flashing c2 untill the timer comes on for 3 minutes? And are you using every spec of reagent for your test? If all that's a yes and the calibration checks out I don't see why the Hanna would be so far off.
Think I may need to follow up with Hanna on this issue.
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 4 13.3%
  • Lighting, pumps, or other major equipment

    Votes: 4 13.3%
  • Controllers, testing, dosing, or automation gear

    Votes: 4 13.3%
  • Dry goods and restocks, like salt, media, or food

    Votes: 3 10.0%
  • Corals! Must...Have...CORALS!!!

    Votes: 8 26.7%
  • Fish or other livestock

    Votes: 1 3.3%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 3.3%
  • I’m browsing, but don’t have a specific target

    Votes: 4 13.3%
  • I’m not shopping for reef deals this year

    Votes: 1 3.3%
  • Other (Post in the comments)

    Votes: 1 3.3%

New Posts

Back
Top
Home
Post thread…
Market
What's new