Hannnah Copper checker accuracy?

Andrew Schubert

Well-Known Member
View Badges
Joined
Jul 27, 2018
Messages
646
Reaction score
320
What state or country do you live in
Illinois
Rating - 0%
0   0   0
So I decided to dose copper in my QT just to be safe. I wanted to monitor it closely so I bought the Hannah checker. The bottle of Cuprion says 1 drop per gallon to reach .2ppm. So I put 5 drops in the first day and the checker read .06. I then added 10 more drops the next day and checked. Now the checker read .04??? So I added 10 more drops. So 25 drops in all. (5 more then directions say I need for my 20 gallon QT). Now the checker reads .11. so I check again, and now it reads .15. I did the test one more time and it reads .05.

The Hannah checker has a +- .05, but this is more then that and all over the place. I dont dare add more copper and run the risk of killing my fish.

They've been in QT for a month with no issues. I might just give up and put them in the DT if this is the best I can monitor the copper levels:-(
 
So I decided to dose copper in my QT just to be safe. I wanted to monitor it closely so I bought the Hannah checker. The bottle of Cuprion says 1 drop per gallon to reach .2ppm. So I put 5 drops in the first day and the checker read .06. I then added 10 more drops the next day and checked. Now the checker read .04??? So I added 10 more drops. So 25 drops in all. (5 more then directions say I need for my 20 gallon QT). Now the checker reads .11. so I check again, and now it reads .15. I did the test one more time and it reads .05.

The Hannah checker has a +- .05, but this is more then that and all over the place. I dont dare add more copper and run the risk of killing my fish.

They've been in QT for a month with no issues. I might just give up and put them in the DT if this is the best I can monitor the copper levels:-(


Just a few things to check before thinking it's the unit itself.
Are the vials being used clean with no smudges? - I place my vials back into the check in the same position they came out.
Are you getting all the powder out of the packet?
Is the powder being dissolved properly?

I can say my copper checker is spot on every time. I usually do 2 tests back to back just to be sure and my readings are never more than +/-1-2 difference.

I used to have the issue you are experiencing with my po4 checker. Ended up being user error.
 
Just a few things to check before thinking it's the unit itself.
Are the vials being used clean with no smudges? - I place my vials back into the check in the same position they came out.
Are you getting all the powder out of the packet?
Is the powder being dissolved properly?

I can say my copper checker is spot on every time. I usually do 2 tests back to back just to be sure and my readings are never more than +/-1-2 difference.

I used to have the issue you are experiencing with my po4 checker. Ended up being user error.
Yeah I have the Phosphate, and Alk checker as well.they r very accurate. I do the same thing. Always test with the 10ml facing out, and never touch the glass with my hands. I always hold it with a paper towel and rense them out afterwards. Plus these viles are brand new at the moment, so about as clean as u can get.
 
I thinking it just doesn't play well with Cuprion. where would i get copper powder? i wonder if copramine would work better. I got the Cuprion bc that's all BRS sells so figured it was the best:-(
 
Yeah, I've never seen it in the fish store. Maybe I'll pick so e other copper up tomorrow. Don't really want to wait on Amazon. LoL...fish been in QT for a month and don't want to delay the process any longer.
 
Yeah I have the Phosphate, and Alk checker as well.they r very accurate. I do the same thing. Always test with the 10ml facing out, and never touch the glass with my hands. I always hold it with a paper towel and rense them out afterwards. Plus these viles are brand new at the moment, so about as clean as u can get.

I would contact Hanna and see what they say. Can you bring your water to a LFS to test for copper in the meantime?

If your fish isnt showing signs of ick I would do a large water change and run carbon to remove the copper. Wait to run copper until you have this issue resolved. Not worth playing a guessing game and chance killing the fish.
 
I haven't one small 2inch size rock glued to a PVC pipe to help hold it. Otherwise the pipe just floats. That and the air stone r the only thing in the QT tank. But even if that was the issue, wouldn't explain why I get 3 readings so far off within seconds of each other
 
If I were to try a different copper, I'd want to remove what's there first. How long does carbon take to remove the existing copper?
 
If I were to try a different copper, I'd want to remove what's there first. How long does carbon take to remove the existing copper?

Not sure how long carbon would take but since it’s a small qt tank I’d just do a 100% water change so then you know you’re starting back with zero copper. The fish will be fine as long as temps match.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 18 18.6%
  • Fish or coral food

    Votes: 5 5.2%
  • Test kits or reagents

    Votes: 10 10.3%
  • Filter media or replacement fleece

    Votes: 5 5.2%
  • RO/DI filters or supplies

    Votes: 15 15.5%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 12 12.4%
  • I keep a backup of everything

    Votes: 25 25.8%
  • Other (Post in the comments)

    Votes: 7 7.2%
Back
Top
Home
Post thread…
Market
What's new