Help dkh is too high

Rickybobby

Valuable Member
View Badges
Joined
May 30, 2020
Messages
1,173
Reaction score
826
Rating - 0%
0   0   0
Hey everyone so I noticed with io reef salt that my alk went up to 15!!! After a while now some of my lps are suffering so I bought a different salt mixed in a tad of the instant ocean so that I could slowly bring the dkh down. But after a water change my main display is still at 15 and I tested the fresh salt mix it’s at 15! I’m slowly loosing some corals and don’t know what to do. Ph was 8.2 last I checked 1.026 sg and temps at 78f
 

nereefpat

7500 Club Member
View Badges
Joined
Apr 20, 2018
Messages
8,185
Reaction score
7,731
Location
Central Nebraska
Rating - 0%
0   0   0
How are you testing alk? You're not adding any "buffer," are you?

I think IO should mix up closer to 11, and reef crystals higher.

Lowering alk is best done by letting the tank consume it, or water changes with a lower alk salt. You can lower the alk in make up water with acid, but I wouldn't try it in a display.
 
OP
OP
Rickybobby

Rickybobby

Valuable Member
View Badges
Joined
May 30, 2020
Messages
1,173
Reaction score
826
Rating - 0%
0   0   0
Test kit is Red Sea not adding anything at all but vibrant and some carbon dosing
 
OP
OP
Rickybobby

Rickybobby

Valuable Member
View Badges
Joined
May 30, 2020
Messages
1,173
Reaction score
826
Rating - 0%
0   0   0
Like I was saying the dkh is Hugh on the fresh mix in the bucket. One thing I must admit. No RODI yet. I’m on well water I will test that tomorrow
 

Reef-Tank

Valuable Member
View Badges
Joined
Oct 18, 2018
Messages
1,423
Reaction score
418
Location
Waukesha
Rating - 100%
3   0   0
Hey everyone so I noticed with io reef salt that my alk went up to 15!!! After a while now some of my lps are suffering so I bought a different salt mixed in a tad of the instant ocean so that I could slowly bring the dkh down. But after a water change my main display is still at 15 and I tested the fresh salt mix it’s at 15! I’m slowly loosing some corals and don’t know what to do. Ph was 8.2 last I checked 1.026 sg and temps at 78f
if you are using Tap water usually have dkh and metals in water colums if you could go to local grocery store or fish store get some Distill/RODI water that would help to bring down your alkalinity for water change.
 

Backreefing

Valuable Member
View Badges
Joined
Nov 29, 2018
Messages
1,325
Reaction score
1,157
Rating - 0%
0   0   0
Get rodi water from a local source and trash instant death and death crystals. Order up some salt mix that mixes how you want . Me I like Red Sea blue bucket. Here is a chart so you can make a good choice.

9B2DB1EA-C460-45C3-8D71-71A29CE47224.png
 

Backreefing

Valuable Member
View Badges
Joined
Nov 29, 2018
Messages
1,325
Reaction score
1,157
Rating - 0%
0   0   0
One more reason to ditch death crystals is it mixes higher than this chart says ( 15-16 DKH) and I used it during the pandemic and my magnesium was unmeasurable high . My guess is 1800-2000ppm
 

|Frank|

Valuable Member
View Badges
Joined
Jul 24, 2020
Messages
1,450
Reaction score
8,782
Location
Florida
Rating - 0%
0   0   0
Was having this problem all week. I have IO reef mix as well and it raised my Kh by a lot. I was reading an old post on here and someone said to lower the salt content to 1.024. I also mixed in some IO (the regular kind) and It brought my Kh from 17 back down to 9. Granted at the time of my high levels I was using api test kit so I went today and got a aquaforest test. I wish I would’ve done this sooner I believe I may have stressed my torch out due to the high alk. :/
 

|Frank|

Valuable Member
View Badges
Joined
Jul 24, 2020
Messages
1,450
Reaction score
8,782
Location
Florida
Rating - 0%
0   0   0
Thank you, I think it’s to late for the torch tbh. I have read that they do bounce back so hoping for the best.
 
OP
OP
Rickybobby

Rickybobby

Valuable Member
View Badges
Joined
May 30, 2020
Messages
1,173
Reaction score
826
Rating - 0%
0   0   0
Being in Canada we only have so many salt choices. But I have scrapped the io. I’m inquiring about an RODI system this week and I will test my well water. My corals were fine until the salt switch
 

|Frank|

Valuable Member
View Badges
Joined
Jul 24, 2020
Messages
1,450
Reaction score
8,782
Location
Florida
Rating - 0%
0   0   0
Io and reef crystals are fine.

But yeah, you're never going to be able to get reasonable parameters mixing with hard source water.
I prefer the IO never had a problem. I also bought a new DI filter just in case it was my water. also was using an api test kit which may have fudged some numbers up as well.
 

92Miata

Valuable Member
View Badges
Joined
Feb 26, 2020
Messages
1,523
Reaction score
2,358
Location
Richmond, VA
Rating - 0%
0   0   0
One more reason to ditch death crystals is it mixes higher than this chart says ( 15-16 DKH) and I used it during the pandemic and my magnesium was unmeasurable high . My guess is 1800-2000ppm
I've been using reef crystals for years, test every bucket, and have never seen numbers that high.

I would guess that your salinity test is wrong and causing you to mix way high.

Did you by chance calibrate a refractometer with RODI?
 

TOP 10 Trending Threads

HOW DO YOU ADJUST YOUR CUC AS ALGAE DISAPPEARS?

  • Capture and re-home CUC

    Votes: 6 7.4%
  • Increase white light/hours in tank to spur algae growth to feed CUC

    Votes: 5 6.2%
  • Feed nori to support CUC

    Votes: 29 35.8%
  • Feed herbivore pellets to support CUC

    Votes: 26 32.1%
  • Allow attrition to balance CUC and algae

    Votes: 37 45.7%
  • Provide macro algae to feed CUC

    Votes: 6 7.4%
  • Introduce CUC predators

    Votes: 1 1.2%
  • Other (please explain)

    Votes: 7 8.6%
Back
Top