HELP. Need ice cap controller

[n2585722]

Placed the order a few days ago and got the controller and adapters yesterday. Got everything hooked up and all is good. Back and running.

Did you get a Wave Engine for a replacement?

 

[themcnertney]

 

[themcnertney]

Did you get a Wave Engine for a replacement?

Yup this replaced the ice cap.

 

[n2585722]

Yup this replaced the ice cap.

That controller will integrate into a Hydros collective. It cannot be a wifi master but it can be a part of a collective. A collective is two or more Hydros controllers connected together with control buss cables and have a collective created. and have them all added. Then it acts as one large controller with all inputs and outputs shared with all members of the collective.

 

[themcnertney]

Couple questions.
1. i can’t seem to control the amount that the pumps produce. Basically they are set to max.

2. getting a good amount of bubbles from the pumps. Any way is stopping that?

 

[StatelineReefer]

Couple questions.
1. i can’t seem to control the amount that the pumps produce. Basically they are set to max.

2. getting a good amount of bubbles from the pumps. Any way is stopping that?

Set a schedule for flow...

then add your pumps to it, set the minimum and maximum to the point where you are comfortable with the flow and the pump does not pull down a column of air

... or set the gyre lower in the tank.

 

[StatelineReefer]

Or you can override directly from the pump screen

Min is 25%, max is 100%

 

[n2585722]

I have several schedules for throughout the day. I even have aschedule for low power mode and for when my feeder rotates to feed. Here is a link to the online manuals https://www.coralvuehydros.com/product-support/ . There is one there for the wave engine and includes the LE.