My 1 month old Apex decided to brick itself this morning.
My original Apex 2016 was running flawlessly for almost 3 years then all of a sudden it started to get a bunch of fusion disconnect errors. I reset the Apex and it bricked itself and started acting completely crazy(lights randomly turning on and off, Kalk doser running constantly, etc). Had plenty of backups and tried everything. Eventually, Neptune said it was bad. I couldn't send it off for repair as it controls my entire system with over 40 outlets. I purchased a new Apex 2016 kit to replace it and I plan on sending the old one off for repair.
The new one was running fine for a month(except for the EB832 that it came with). The EB832 was not monitoring Wattage correctly. Some outlets had 0 watts and others had half the watts being used. I expected this was an issue but didn't think it could be detrimental to the system. Over the last two days, I have received a bunch of Fusion disconnect alerts. Against my better judgment, I decided to restart this Apex yesterday, and wouldn't you know, this one bricked itself. I reached out to Neptune support and haven't received much help as they are closed over the weekend.
I had a backup program on hand and dumped the backup in. The system came back up but the probes and switches wouldn't take so I had to rename and reprogram those. The EB832 would not restore the power loss trouble even though it was on and connected to the system. I decided to swap the new EB832 out with my older one and it is working now and the wattage is being monitored correctly.
The issue I have now is nothing is being logged on Fusion and local. No data for event logs, Trident, Probes, DOS dosing intervals, and power usage graphs. Has anyone experienced something like this? I hope Neptune can rectify this issue tomorrow because this is extremely stressful. A lot of money and stress over the last month for something that shouldn't cause this.
@SuncrestReef Have you heard or seen anything like this? Any help on this would be greatly appreciated.
Apex local. No graphs.
Apex Fusion - No graphs, logs, or data. All data stops after 10am this morning.
No log entries for today. I log my Kalk doser and it runs every 5 min. It is enabled for logging.
Example of yesterdays event log
Dos started logging shortly after 10am this morning.
My original Apex 2016 was running flawlessly for almost 3 years then all of a sudden it started to get a bunch of fusion disconnect errors. I reset the Apex and it bricked itself and started acting completely crazy(lights randomly turning on and off, Kalk doser running constantly, etc). Had plenty of backups and tried everything. Eventually, Neptune said it was bad. I couldn't send it off for repair as it controls my entire system with over 40 outlets. I purchased a new Apex 2016 kit to replace it and I plan on sending the old one off for repair.
The new one was running fine for a month(except for the EB832 that it came with). The EB832 was not monitoring Wattage correctly. Some outlets had 0 watts and others had half the watts being used. I expected this was an issue but didn't think it could be detrimental to the system. Over the last two days, I have received a bunch of Fusion disconnect alerts. Against my better judgment, I decided to restart this Apex yesterday, and wouldn't you know, this one bricked itself. I reached out to Neptune support and haven't received much help as they are closed over the weekend.
I had a backup program on hand and dumped the backup in. The system came back up but the probes and switches wouldn't take so I had to rename and reprogram those. The EB832 would not restore the power loss trouble even though it was on and connected to the system. I decided to swap the new EB832 out with my older one and it is working now and the wattage is being monitored correctly.
The issue I have now is nothing is being logged on Fusion and local. No data for event logs, Trident, Probes, DOS dosing intervals, and power usage graphs. Has anyone experienced something like this? I hope Neptune can rectify this issue tomorrow because this is extremely stressful. A lot of money and stress over the last month for something that shouldn't cause this.
@SuncrestReef Have you heard or seen anything like this? Any help on this would be greatly appreciated.
Apex local. No graphs.
Apex Fusion - No graphs, logs, or data. All data stops after 10am this morning.
No log entries for today. I log my Kalk doser and it runs every 5 min. It is enabled for logging.
Example of yesterdays event log
Dos started logging shortly after 10am this morning.