Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Any trick? The one on the reefer 750 seems stuck, i dint want to break it lolAha. Got the tray out. Can now spend some £££. Thank you.
The tray slides out and the glass baffle pulls up (2:20min mark in the following video):
oh really you still have to cut on the G2? anyone else have to do this?In my G2 tank the glass near the 2 pipes had to be cut out with the Red Sea sump modification kit knife . That piece came out easily but was not free to slide out.
If you put a filter mat on the left and a skimmer on the right then yes you are ready to go, but then you cannot have the ATO reservoir anywhere. To keep the reservoir (on the left near the 2 pipes) then the skimmer goes behind the mat away from the pipes. Some people lifted the glass near the pipes out but I had to cut through the mastic on my piece of glass. Only took 5 minutes.oh really you still have to cut on the G2? anyone else have to do this?
my understand and it could be wrong was that they where no cut reef mat ready?
ah i see I have a huge skimmer + the reef mat so no ATO res for me. anyway there to small its dry up here. I evap to much for those little guys. i'll have a 29H behind the couch that should get we 3-4 weeks.If you put a filter mat on the left and a skimmer on the right then yes you are ready to go, but then you cannot have the ATO reservoir anywhere. To keep the reservoir (on the left near the 2 pipes) then the skimmer goes behind the mat away from the pipes. Some people lifted the glass near the pipes out but I had to cut through the mastic on my piece of glass. Only took 5 minutes.
Hi There. Is there an old thread? I bought the Red Sea conversion kit which is basically a very thin and flexible blade. Cuts through the mastic easily and then with a gentle wiggle or two out it all comes. Just be careful not to get close to other bits of mastic.I'm having the same problem mate, any idea on what I can do? don't want to break it
so with the g2 you had to remove the sock holder with the blades too?Hi There. Is there an old thread? I bought the Red Sea conversion kit which is basically a very thin and flexible blade. Cuts through the mastic easily and then with a gentle wiggle or two out it all comes. Just be careful not to get close to other bits of mastic.
It was a while ago. I think the sock holder pulled out horizontally with some pulling, then I took out the other glass to get a skimmer and roller mat in. Just one thing - on my 250 the Red Sea skimmer and mat do fit 9n with a bit of a squeeze. Mat front right and the skimmer behind, if you want to keep the ATO reservoir on the left. Good luck. Maybe consider a skimmer with a smaller footprint.so with the g2 you had to remove the sock holder with the blades too?
so with the g2 you had to remove the sock holder with the blades too?