HELP PLEASE LAST MINUTE ISSUE ON SET UP

[mandi29221]

My husband plumbed my 75 gal with 80 sch pvc 1in. The issue is we can't find a nozzle to fit the inch pvc. Any and all help would be appreciated. Picture of the pipe

 

[bean2986]

It might tank a few days, but BRS probably has what you need?

https://www.bulkreefsupply.com/pumps-plumbing/plumbing/schedule-80-fittings.html

 

[NB Reefer]

Not sure what type of nozzle you are looking for. It looks like that may be your return pipe? I would get the following:
-slip to female https://www.bulkreefsupply.com/sche...apter-1-612b7f0d62f21fab8f0cbff2986fa81f.html
-male loc line adapter https://www.bulkreefsupply.com/loc-line-male-npt-connector.html
-Loc line https://www.bulkreefsupply.com/loc-line-modular-hose-segments.html
-Loc line flare nozzle or other nozzle https://www.bulkreefsupply.com/loc-line-flare-nozzle.html

I linked Bulk Reef Supply but these can also be found on Amazon.

 

[Cjud7982]

^+1, this is how I set up all of my return nozzles over the top or through a bulkhead. same way. hard pvc, slip x female thread adapter, then to line loc with a nozzle.

 

[mandi29221]

Not sure what type of nozzle you are looking for. It looks like that may be your return pipe? I would get the following:
-slip to female https://www.bulkreefsupply.com/sche...apter-1-612b7f0d62f21fab8f0cbff2986fa81f.html
-male loc line adapter https://www.bulkreefsupply.com/loc-line-male-npt-connector.html
-Loc line https://www.bulkreefsupply.com/loc-line-modular-hose-segments.html
-Loc line flare nozzle or other nozzle https://www.bulkreefsupply.com/loc-line-flare-nozzle.html

I linked Bulk Reef Supply but these can also be found on Amazon.

Thank you my husband reduced it to 3/4 for more options. And ordered those pieces at 3/4 THANK YOU SO MUCH