Help raising pH

With Apex Probe that was recently calibrated.
Any other way to test? Like a Hanna or a test kit just to be sure the probe isn’t off. Mine was like this right after I calibrated and it was driving me crazy. Bought the Hanna and it read 8.1 while my apex was reading 7.6. I also live in central Florida and opening up windows isn’t a thing down here.
 
Any other way to test? Like a Hanna or a test kit just to be sure the probe isn’t off. Mine was like this right after I calibrated and it was driving me crazy. Bought the Hanna and it read 8.1 while my apex was reading 7.6. I also live in central Florida and opening up windows isn’t a thing down here.
So I just tried checking with my Hanna pH checker, said 8.1, but I am not entirely sure how calibrated it is, as it was dry when I took off the cap.
 
Just a little background on pH...

https://www.reef2reef.com/threads/aquarium-ph-distilled.853474/
...and a couple of thoughts:
  • pH measurements from hobby grade testers are often innaccurate. So take your readings with a grain of salt.
  • Your pH most likely is tied to your effective C02
  • Your effective CO2 is your combined sources and sinks in your tank
  • With a 300 gal tank and good water movement, your skimmer's gas exchange with CO2 scrubbed air may be much smaller than your tank's gas exchange with the highor CO2 house air. Thus, you may not see much of a benefit from the CO2 scrubber.
  • Kalkwasser should give you a decent (can be estimated) bump
  • Macroalgae and other photosynthetic organisms can give you bumps during the light cycle
  • Running a refugium on reverse light cycle can help at night
I hope this gives you some ideas...
 
Also surface agitation. How well is your water movement at the surface?

Your 8.1 hanna checker is promising too!
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 17.7%
  • Fish or coral food

    Votes: 5 5.2%
  • Test kits or reagents

    Votes: 10 10.4%
  • Filter media or replacement fleece

    Votes: 5 5.2%
  • RO/DI filters or supplies

    Votes: 15 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 12 12.5%
  • I keep a backup of everything

    Votes: 25 26.0%
  • Other (Post in the comments)

    Votes: 7 7.3%
Back
Top
Home
Post thread…
Market
What's new