Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Where in the plumbing is this "pin hole?" There is so much duct tape it's hard to figure if this is in a joint or a tiny hole in pipe as you are describing it?
If it is a supply line that is under pressure it will continue to leak till you properly fix it. Since it’s a small leak for now keep it taped till you buy the proper parts to fix it.So basically this photo.
the red line is where the 90 degree elbow connects with the trigger black pre-provided coupling.
the leak was right at the seam. About 1 drop every 5 seconds.
it’s a L2 vectra return pump
If it is a supply line that is under pressure it will continue to leak till you properly fix it. Since it’s a small leak for now keep it taped till you buy the proper parts to fix it.
Omg yes if there is no fish or corals this is the time to fix it. I thought this was on a system that was establishedyeah it’s my new build so it’s dry was just running the leak test.
guess I’ll have to chop it up and re do it
Being a pressure supply line and the fact tank is empty of coral and fish it’s time to fix it right IMO why half butt itRemove the tape. Turn the pump off. Dry area. Add pvc glue in a circular motion around any joints. Let dry. This will seal up any leaks.
Hths you!
-d