Helpppp I have an emergency!!!!

  • Thread starter Thread starter merlberg
  • Start date Start date
  • Tagged users Tagged users None

merlberg

Valuable Member
View Badges
Joined
Feb 22, 2015
Messages
1,025
Reaction score
155
Location
New York
Rating - 0%
0   0   0
image.jpg
image.jpg

I have no clue on what to do! My knob broke and idk how to stop the water from running!

Help anyone please
 
What do you mean when you say at the source?

Where your RODI system gets it's water. Mine is connected to a cold water garden hose spigot. I would turn it off there.

Where is your RODI system getting it's water from?
 
Home Depot, Lowe’s they all sell 1/4 push connect
 
The red hose... one end goes to the RODI. Where does the other end go??
 
My thought in an emergency is take the waste line from the DI and plug it into the supply line.not 100% sure about pressure but it should hold the water in the DI chamber

Edit, May need to clarify, take the back line out of the flow restricted, pull the blue line out and put the black line in
 
I will let you handle this one

That doesn't really answer the question.

The red hose is the source water line... it is the line that provides water to the RODI. One end is connected to the RODI and the other side is connected where?
 
That doesn't really answer the question.

The red hose is the source water line... it is the line that provides water to the RODI. One end is connected to the RODI and the other side is connected where?

Ah, good point. If it’s b4 di my trick won’t help
 
Its gotta be hooked to the main plumbing from the house water line. Usually with a crimp valve on the pipe. There should be a shut off there... and then the 1/4" john guest valve fitting is sold at home depot for 8$
 
Where your RODI system gets it's water. Mine is connected to a cold water garden hose spigot. I would turn it off there.

Where is your RODI system getting it's water from?
Mysink... i seen the knob and just turned it off and the water stopped running!!! Thanks now im going to run to home depot!
 
Where does the blue line from the RO/DI unit go?

On BRS RO/DI units
Blue line is the water INPUT or SOURCE.
Black line is Waste water out.
Red line is final product water for the tank.

Follow your blue line to where it is connected to the house plumbing. I have to assume the installer would have sense enough to have installed a shut off valve of some sort.
Turn it off there
 
Its gotta be hooked to the main plumbing from the house water line. Usually with a crimp valve on the pipe. There should be a shut off there... and then the 1/4" john guest valve fitting is sold at home depot for 8$
Yes i just checked under my sink ad thts where it was. I just turned the knob and it stopped the water so now i’m running to home depot! Thanks so much
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new