- Joined
- Sep 2, 2018
- Messages
- 18
- Reaction score
- 19
- Location
- Sussex
- What state or country do you live in
- Wisconsin
My Innovative Marine SR-60 tank has been running for about a year. Things have overall progressed well but starting a few months ago I've started adding corals. Mushrooms, Zoas, Anthelia, and even euphyllia have done well. However, a couple chalices, a Candy Cane, and now 2 favia have done the same thing - initially are OK, but then over the course of 2-3 months, polyps gradually retract and they die. My parameters have been stable and good (spec grav 1.025, temp 77-78, ph 8.1-8.4, alk 8.6-9, phos 0.02-0.06, nitrate 1-2, mag 1380-1440, calcium 460-500). Running filter socks, skimmer, algae reactor, and using a media caddy with GFO and ROX0.8 carbon. Feed few times per day with Marin/Hikari pellets + Nori + frozen mysis. Using BRS bulk 2-part and magnesium, CoralAminos, and phyoplankton. RO/DI output is always 0 TDS. Because I couldn't figure out why the LPS weren't doing well, I got a Triton ICP test. It confirmed that my parameters were correct. I had nothing wrong other than no iodine and a Chromium level of 16 mcg/l.
https://www.triton-lab.de/en/showroom/aquarium/auswertung-b/icp-oes/94901/
I will try dosing iodine but obviously I'm concerned about the chromium. Like several other threads, I've looked everywhere for a source and can't find it. I started the tank with BRS Reef Saver rock and CaribSea LiveSand and have no exposed metal. I just cleaned my pumps and everything looked OK. I have a grounding probe, but it's titanium and has no evidence of corrosion.
Since this appears to be a common problem, are there other causes I should be looking for? If I can't find one, how can I at least remove the chromium. It does seem to me that when I replace the carbon, the LPS look better for a while. They also look better after a 15-20% water change. Replacing all my pumps just isn't financially feasible, nor do I think it will help. Others have had this problem and it hasn't helped. Also, if I had exposed metal, a random nail, etc I would expect other metals to be high on my ICP test.
I would appreciate any suggestions people have.
https://www.triton-lab.de/en/showroom/aquarium/auswertung-b/icp-oes/94901/
I will try dosing iodine but obviously I'm concerned about the chromium. Like several other threads, I've looked everywhere for a source and can't find it. I started the tank with BRS Reef Saver rock and CaribSea LiveSand and have no exposed metal. I just cleaned my pumps and everything looked OK. I have a grounding probe, but it's titanium and has no evidence of corrosion.
Since this appears to be a common problem, are there other causes I should be looking for? If I can't find one, how can I at least remove the chromium. It does seem to me that when I replace the carbon, the LPS look better for a while. They also look better after a 15-20% water change. Replacing all my pumps just isn't financially feasible, nor do I think it will help. Others have had this problem and it hasn't helped. Also, if I had exposed metal, a random nail, etc I would expect other metals to be high on my ICP test.
I would appreciate any suggestions people have.
