Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Ill check what it feels like when I get home again but I've seen no bubbles and the part In between glass looks intact. Thanks!Agree. Not looking terrible. If you use a magnetic or other type of scraper, be gentle there.
Thanks so it should still be fine for quite awhile then?That's what my 60g looks like. Scraped off a lot of the silicon and it held still. 10g isn't going to do much. It has bracing at least.
How old is the tank? As another posted stated.Thanks so it should still be fine for quite awhile then?
This is what you are looking for, when a tank begins to fail.I wouldn't be concerned just yet. Is the silicone still spongy feeling? old silicone gets brittle. The seam inbetween the glass joint is where you get concerned as long as that is still intact and no bubbles you are good.
Tough to tell but are there any bubble in the seam?
How old is the tank? As another posted stated.
This is what you are looking for, when a tank begins to fail.
How old is the tank? As another posted stated.
This is what you are looking for, when a tank begi
I have no idea how old it is bought it used from a LFS that's why I'm a couple months out from finishing a brand new bigger buildThe seal between glass panes appears perfectly fine. The silicone on the outside is getting beat up but at ten gallons I wouldn’t be concerned. I had the same problem in my 60g cube. Now I just let the algae build when it gets that close to the silicone