How does this happen in 6 hours

OP
OP
Jake_the_reefer

Jake_the_reefer

2500 Club Member
View Badges
Joined
Apr 19, 2019
Messages
2,616
Reaction score
2,049
Rating - 0%
0   0   0
So yeah, the issue is 100% my lack of rodi. Would this unit for for a budget one? Or are there others I should look at first. This just happens to be the one my lfs sells

Screenshot_20190704-105024_Chrome.jpg
 

Dkeller_nc

Well-Known Member
View Badges
Joined
Mar 2, 2019
Messages
893
Reaction score
1,249
Rating - 0%
0   0   0
Yes, it will work. The downside is the cost of replacement cartridges and the fairly low water production of the unit. If you have very small tanks maintenance practices that result in a low water demand (i.e., infrequent water changes), then the low initial purchase price might be attractive.
 
OP
OP
Jake_the_reefer

Jake_the_reefer

2500 Club Member
View Badges
Joined
Apr 19, 2019
Messages
2,616
Reaction score
2,049
Rating - 0%
0   0   0
Yes, it will work. The downside is the cost of replacement cartridges and the fairly low water production of the unit. If you have very small tanks maintenance practices that result in a low water demand (i.e., infrequent water changes), then the low initial purchase price might be attractive.
How often do they need replacing and how much usually
 

madweazl

2500 Club Member
View Badges
Joined
Sep 19, 2016
Messages
4,110
Reaction score
5,055
Location
Virginia
Rating - 0%
0   0   0
So yeah, the issue is 100% my lack of rodi. Would this unit for for a budget one? Or are there others I should look at first. This just happens to be the one my lfs sells

Screenshot_20190704-105024_Chrome.jpg

That is a pretty inefficient system; the rejection rate is 4.5:1. This means you'll waste 4.5 gallons of water (literally going down the drain unless you plumb it outside to water a garden or the lawn) for every 1 gallon of RO/DI water produced (the water you'll use for the tank). This SpectraPure system is 10 times the cost but will save you money in the long run because you're wasting far less water (it has a 1:1 ratio). Look at the various systems and find one that has a price to performance ratio you can live with.
 

Dkeller_nc

Well-Known Member
View Badges
Joined
Mar 2, 2019
Messages
893
Reaction score
1,249
Rating - 0%
0   0   0
How often do they need replacing and how much usually
Looks like the DI resin cartridges are about $20 each. I couldn't find the specifications for the resin capacity, which would be needed to calculate its capacity for removal of ionic components that make it through the RO membrane. It's also not clear whether you can actually refill the DI resin cartridge with loose resin, or you have to toss the whole assembly, plastic housing and all.

As far as cost, it appears that Amazon will sell you a 3-cartridge replacement kit (DI resin, sediment and carbon) for about half of the cost of the unit.

When considering a RODI unit, there's a few things in play that may affect the lifetime of the unit and the quality of the water it produces. Specifically, it will depend on the incoming water's characteristics and whether or not the user is on well water (no chlorine/chloramine) or on municipal water (typically sanitized with chloramine). In the eastern US, municipal sources that use surface waters, such as lakes or rivers, will tend to have tap water that's fairly low in dissolved ionic solids (TDS <200 ppm). In the western US, some hobbyists sarcastically call the municipal water "liquid rock", since it has TDS that is often 700 ppm or above. Ultra hard municipal water is more difficult to successfully purify to RODI standards, and it typically requires more complex and expensive systems to run in an economic manner, such as using two RO membranes in series with a booster pump. If you're on municipal water, you can look up the water authority's test results on line and get an idea of what the typical incoming water will be.

As for purchasing a system, the RO buddie is probably ideal for freshwater hobbyists that don't require ultimate purification the way saltwater hobbyists do, for people with smaller tanks, and for folks that live in the eastern US where water costs are often dramatically lower than in the western US so that an RO system's waste water isn't as much of a concern.

You can, by the way, always purchase a traditional, modular system from Bulk Reef Supply like their "value" systems (about $150), and add on to them if you determine that you need extra carbon blocks to filter chloramine, or you want more water production for bigger tanks. I believe they sell sink adapter fittings to hook their systems up temporarily as well.
 

TOP 10 Trending Threads

WHAT AMOUNT OF LIVE ROCK AND SAND SHOULD BE PRIORITIZED FOR OPTIMAL BIODIVERSITY/FILTRATION?

  • 100% live rock + bagged sand

    Votes: 38 26.6%
  • 100% dry rock + 100% live sand

    Votes: 48 33.6%
  • 50/50 live/dry rock, 50/50 live/bagged sand

    Votes: 32 22.4%
  • 75% live rock, 25% live sand

    Votes: 15 10.5%
  • 25% live rock, 75% live sand

    Votes: 10 7.0%
Back
Top