Hydros control - how do i add usb fan?

[newfly]

i did some web searching but did not find whats i'm looking for. Any guidance would be much appreciated.

Summer is coming and i want to add a usb fan to cool the tank, ideally control by Hydros. I have open USB ports on the wifi strip.

I cannot find any instruction on how to i add usb fan on the app. I would like the fan to turn on if the temp exceed say 80F.

 

[WVNed]

Use the output program page for chiller, the temp probe as the input and the output device would be the 1-5 port on the power strip. Set the on and off temps.
All 4 usb ports on a power strip turn off and on together.

 

[newfly]

Ah, thanks! I didn’t realized all 4 USB port turn off and on the same time.

 

[n2585722]

I use cooling fans but they are 12v IP67 rated fans. The photo below is one of the fans I have. It has the standard computer fan connector. I power them with a 12v supply that I added the connector to mate with the fan connector. I use the chiller output type to control it with. You can do the same with a wifi USB port and a USB fan. I did not have good luck with the fans lasting until I started using the ones with a IP67 rating.

 

[Connor At CoralVue]

Yup, you can use the chiller feature, that would work great. Alternatively, you can use the Generic Input. This is an ultra customizable output profile, you can use up to 9 inputs to make an output decision.

 

[newfly]

Hook up the usb fan using the Chiller setup. Works great! Thank you all