I have a problem and need help

  • Thread starter Thread starter Mester320
  • Start date Start date
  • Tagged users Tagged users None

Mester320

Well-Known Member
View Badges
Joined
Jul 13, 2013
Messages
609
Reaction score
168
Location
Saint Marys, PA
Rating - 0%
0   0   0
I built a fishroom and all was going well until I realized that the floor were my 6 foot acrylic sump sits is not level and one corner of the sump does not touch the floor. I have 2 layers of self leveling mat under but it is just too much to make up with foam. What can I do?
 
Here it is

20201015_213638.jpg
 
probably just pack that sump up and ship it to me...doesnt look like it will work for you, lol.

In all seriousness, maybe build a small short stand for it to sit on. And just build it out of level to offset the floor issue. Sheet it with plywood then add the foam or self leveling mats.

Beautiful sump
 
probably just pack that sump up and ship it to me...doesnt look like it will work for you, lol.

In all seriousness, maybe build a small short stand for it to sit on. And just build it out of level to offset the floor issue. Sheet it with plywood then add the foam or self leveling mats.

Beautiful sump
+1 on this idea, You might also get some of the adjustable feet for the stand, that way you can build the stand normally and then just adjust the feet to get it level.
 
I built a fishroom and all was going well until I realized that the floor were my 6 foot acrylic sump sits is not level and one corner of the sump does not touch the floor. I have 2 layers of self leveling mat under but it is just too much to make up with foam. What can I do?
How much is it off?
1/2", 2 "
Acrylic is more compliant, so that's good.
Why do we care if the sump is level?
 
Here's an idea, and see if anyone else thinks it will work. Use a piece of 3/4" plywood under the entire length. Put the leveling mats over that, and the sump on top. Then shim the plywood to level. The strength of the plywood combined with the mats should relieve any stress on the sump. Maybe.
 
So I need to keep it as close to the ground as possible for drainage drop. I have attacheda few more pics of it full and a close up of the gap

IMG_20201027_215637.jpg IMG_20201027_215639.jpg
 
Place it on a plywood cutout and shim if necessary
 
What should I coat the plywood with since it will be in contact with a decent amount of saltwater. I have some topside paint...
 
a gloss would be best,but any paint will seal it :)
 
perfect!!!
 
has to be 3/4" ,does not have to be marine grade
 
the edges will seal with the marine paint
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 26 22.8%
  • I’d trust someone who knows my tank to choose

    Votes: 10 8.8%
  • I’d rather get a gift card and pick it myself

    Votes: 45 39.5%
  • I’d prefer gear or supplies instead

    Votes: 3 2.6%
  • Please don’t surprise me with livestock

    Votes: 30 26.3%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new