I need help with Digital Aquatic
- Thread starter Hoparna
- Start date
- Tagged users None
It should be like my reef keeper elite. Connect one of the power bars to the main head unit, then connect the second bar to the second slot of the first power bar. Reef keeper equipment is designed to Daisy chain off of each piece of equipment. Then plug both power bars into an outlet. The display should fire right up and give you access to the controller. It will probably be configured from the previous user.
The manuals can be found online or YouTube videos. Which model reef keeper do you have? The lite or the elite?
The manuals can be found online or YouTube videos. Which model reef keeper do you have? The lite or the elite?
First I had the one power bar, then my LFS guy brought the second one and connected it over the sump. I just took it out from the sump area and relocated it. But now I cant connect it back up. I can take a picture and post it in the morning on here and maybe you can guide me please.
Here's a manual for the reef keeper lite. Click the first link that is a PDF download for the manual
And here's the one for the elite. Again click the first link of the search to download the PDF manual.
And here's a quick brs video of setting them up
I would be more than happy to help you out with anything I can.
And here's the one for the elite. Again click the first link of the search to download the PDF manual.
And here's a quick brs video of setting them up
I would be more than happy to help you out with anything I can.
n2585722
2500 Club Member
Which one do you have Lite, Elite or Archon? There are a couple of others but they are a lot older.
n2585722
2500 Club Member
Looks like you have a Lite and a SL2 and 2 PB4's. There is a iTemp probe that attaches to the buss port and a temp probe that attaches to the temp input on your SL2 module. Which temp probe do you have? The other will read error if nothing is hooked to the port.
n2585722
2500 Club Member
That would be the iTemp. Scroll to see if you can find the iTemp port. That probe actually uses two of the six wires of the buss to connect to the port in the RKL head unit. The heater, fan and chiller function use only this probe only on the Lite. You will need to find or make a probe for the temp port on the SL2 module if you wish to have that probe. Check this link https://www.reef2reef.com/threads/alternatives-to-digital-aquatics-probes-and-parts.439573/.
n2585722
2500 Club Member
FYI don't try and use phone cords or adapters with the controller. Phone cables have the connections flipped on the connector. Also the adapters can also have the connections flipped.
n2585722
2500 Club Member
Hoparna are you the person that posted on AskBRS about this? I did not know you did not understand what I was trying to say. Sorry about that. The RKL has an iTemp prot built into it. That is what the probe you described connect to. The SL2 also has a temp port on it that is labeled Temp. It does not have a probe connected to it in the photo. The port you have selected in the photo is the port on the SL2 without a probe connected. That is thr reason it shows error. You will have to select the iTemp prot to get the port that your probe is connected to. Hope this helps.
Similar threads
