I think I may have made a mistake?

Morgan Rodgers

Active Member
View Badges
Joined
Jun 13, 2019
Messages
276
Reaction score
127
Rating - 0%
0   0   0
So I have never really done any serious aquascaping so when I decided to upgrade I tried pretty hard to make it look aesthetically pleasing. One thing I neglected was making sure everything stuck together‍♂️. Am I alright to just leave it be? What is the next step? Additionally; is my aquascaping alright for all kinds of coral?

IMG_0713.jpeg
 

EricR

Valuable Member
View Badges
Joined
Jun 9, 2021
Messages
2,337
Reaction score
2,475
Location
California USA
Rating - 0%
0   0   0
What's your biggest concern?
Do you have pieces/sections that obviously move if you bump them and feel like they could easily topple?
...or are you just doing a visual assessment from the outside and thinking about problem areas?

I'd think you'd be feeling that out as you were stacking but you could assess some with your hands in the tank now if you didn't pay that much attention when you were putting the rock in.
 

gbroadbridge

2500 Club Member
View Badges
Joined
Mar 25, 2021
Messages
4,080
Reaction score
4,268
Location
Sydney, Australia
Rating - 0%
0   0   0
So I have never really done any serious aquascaping so when I decided to upgrade I tried pretty hard to make it look aesthetically pleasing. One thing I neglected was making sure everything stuck together‍♂️. Am I alright to just leave it be? What is the next step? Additionally; is my aquascaping alright for all kinds of coral?

IMG_0713.jpeg
Looks good. Is there enough room to get an algae scraper on the glass back of the tank behind the rock?

How are the rocks held together? Stacking alone is not a good idea unless they fit really well together
 
OP
OP
M

Morgan Rodgers

Active Member
View Badges
Joined
Jun 13, 2019
Messages
276
Reaction score
127
Rating - 0%
0   0   0
Looks good. Is there enough room to get an algae scraper on the glass back of the tank behind the rock?

How are the rocks held together? Stacking alone is not a good idea unless they fit really well together
I stacked them, didn’t realize there was another way until I read up on aquascaping unfortunately. There’s enough room for a scraper for the back glass.
 
OP
OP
M

Morgan Rodgers

Active Member
View Badges
Joined
Jun 13, 2019
Messages
276
Reaction score
127
Rating - 0%
0   0   0
What's your biggest concern?
Do you have pieces/sections that obviously move if you bump them and feel like they could easily topple?
...or are you just doing a visual assessment from the outside and thinking about problem areas?

I'd think you'd be feeling that out as you were stacking but you could assess some with your hands in the tank now if you didn't pay that much attention when you were putting the rock in.
I am just doing a visual assessment, I was pretty careful with everything except the fact that I stacked.
 

EricR

Valuable Member
View Badges
Joined
Jun 9, 2021
Messages
2,337
Reaction score
2,475
Location
California USA
Rating - 0%
0   0   0
I am just doing a visual assessment, I was pretty careful with everything except the fact that I stacked.
Just personally, I'd go by how sturdy it feels in the tank.
If it seems unlikely that something like an earthquake or just you bumping something would topple anything, I'd just leave it.
*any parts that seem iffy could hopefully be sured up with underwater epoxy

Being able to remove sections if needed/desired has benefits anyway.
*in an ideal world, I'd like rods for security and still be able to remove major sections but I was too lazy to do that

Hard to tell anything really from a 2D picture but if your keyway rock over your cave/passthrough in the middle is really stable and everything working up and outward is stable to that,,, "feels" (to me) like you'll be fine, IMO

...only other thing, are your base rocks set on the sand where they might settle and shift, or sitting mainly on the bottom glass?
 
OP
OP
M

Morgan Rodgers

Active Member
View Badges
Joined
Jun 13, 2019
Messages
276
Reaction score
127
Rating - 0%
0   0   0
Just personally, I'd go by how sturdy it feels in the tank.
If it seems unlikely that something like an earthquake or just you bumping something would topple anything, I'd just leave it.
*any parts that seem iffy could hopefully be sured up with underwater epoxy

Being able to remove sections if needed/desired has benefits anyway.
*in an ideal world, I'd like rods for security and still be able to remove major sections but I was too lazy to do that

Hard to tell anything really from a 2D picture but if your keyway rock over your cave/passthrough in the middle is really stable and everything working up and outward is stable to that,,, "feels" (to me) like you'll be fine, IMO

...only other thing, are your base rocks set on the sand where they might settle and shift, or sitting mainly on the bottom glass?
the rocks are sitting on the bottom glass with the exception of one, bc I kinda forgot abt it when doing the aquascaping lol. It’s not a very important rock, and next water change I’ll prob try and put on the glass. My middle rock feels very stable.
 

Making aqua concoctions: Have you ever tried the Reef Moonshiner Method?

  • I currently use the moonshiner method.

    Votes: 31 21.4%
  • I don’t currently use the moonshiner method, but I have in the past.

    Votes: 2 1.4%
  • I have not used the moonshiner method.

    Votes: 106 73.1%
  • Other.

    Votes: 6 4.1%
Back
Top