ICP results advice (AL problem)

[reefkeeperros]

Hi folks,

Need some help, received my ICP results today. Reason for sending one in the first place I noticed some acros slowly starting to lose colour and die off, as everyone else would do I did water changes and tested every 2 days for month nothing changed one bit so I sent out an ICP. I'm not concerned about trace elements as that can be fixed easily I'm more concerned about Aluminium being high af is that possible cause for acros dying off? 1 thing I noticed that could be causing high Aluminium is my D-D jump guard which has few spots of paint missing? Is there anything I can do to lower the level of aluminium in the water? See the pictures below

Thanks, happy reefing

Parameters:

ALK: 7.2-7.5 HANNA
CAL 450-480 HANNA/SALIFERT
MAG 1350-1400 SALIFERT
PO4 0-0.02 HANNA
NO3 0.25 SALIFERT
SALINITY 1.025 HANNA
PH 8.0-8.2 SALIFERT
TEMP 25.5-26 CELSIUS

Dosing:

RedSea Foundation A
RedSea Foundation B
RedSea Foundation C
RedSea Foundation Trace Colours ABCD
RedSea Energy AB+
Brightwell Neo Phos & Neo Nitro when needed

Salt:

RedSea Blue bucket

 

[theMeat]

You have any marinepur?

 

[reefkeeperros]

You have any marinepur?

Yes

 

[AZMSGT]

High Aluminum happens in allot of new tanks. Also ceramic media such as marine pure tends to cause high AI

 

[Randy Holmes-Farley]

Your aluminum is pretty high, but I would not be sure the SPS issue is not nutrients too low.