Thanks for the help guys. I did find some slight rust on the screws of my mixing station pump. I’m going to change that out. What’s weird is, on my old 90g I had, I had the same problems I’m having with my new waterbox 7225 build. The only thing that is the same between these two builds is the mixing station pump. That was the return pump that ran the 90. I was worried about silicates and iron, which looked fine in the icp. I’m on well water and my initial levels are high before RODI but my tds is always zero. I’ve had an ongoing algae/ bacteria issue between these two systems and that’s why I did the icp. From the beginning 6 week lightless cycle with this 7225 I have always kept my no3 and po4 in check. So with my tested parameters in check I was thinking it was something an icp would detect. Kind of tired of chasing my tail. I had a little Dino in the first few months of this system but now I’m thinking it’s chrysophytes. It’s not bad and over taking the tank but it’s there. The tank perimeters have really leveled out the last month or so and I’m hoping it’s starting to settle in. Hopefully between all the new pvc, glass and swapping out this pump and some water changes, the tin levels will go down.