If the drain pipe had no bends...

Kristonenicolas

Active Member
View Badges
Joined
Feb 6, 2012
Messages
123
Reaction score
55
Location
San Diego
Rating - 0%
0   0   0
If the drain had no bends and went straight down to the sump, would this be noisy?

I would be doing this example.
4fa05e3ff23853e91a6de1776c3f1d3c.jpg
 
If the drain had no bends and went straight down to the sump, would this be noisy?

I would be doing this example.
4fa05e3ff23853e91a6de1776c3f1d3c.jpg

It will make noise. With a stand pipe as water enters, it's must pull air with it to drain. That pulling air and water causes the noise.
 
It will make noise. With a stand pipe as water enters, it's must pull air with it to drain. That pulling air and water causes the noise.
Another thing is the emergency drain really won't be of any help the way it is plumbed in the pic. 99% of the time the clog happens right at the strainer. In your picture it appears you are only using 1 drain input then splitting afterwards. My opinion is this is a flood waiting to happen.
You need to have at least 1 main drain with a gate valve and 1 drain that is unrestricted (emergency).
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 17.7%
  • Fish or coral food

    Votes: 5 5.2%
  • Test kits or reagents

    Votes: 10 10.4%
  • Filter media or replacement fleece

    Votes: 5 5.2%
  • RO/DI filters or supplies

    Votes: 15 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 12 12.5%
  • I keep a backup of everything

    Votes: 25 26.0%
  • Other (Post in the comments)

    Votes: 7 7.3%
Back
Top
Home
Post thread…
Market
What's new