IM APS stand for the SR80

[mcwhng]

Interested to know if this aluminum stand would be able to support a 120 gallon breeder which has almost the same dimensions as an SR80 (slightly short of the 120’s 48 by 24 inches).

 

[Nate77]

Well if the 120 is actually 48" no, now if its ty he following diamesions I would think ,actual stand dimensions according to them is 47.44 x 23.82. I can get actual measurements in am.

If you want an aluminum stand go with 80/20 , no back ,sides are w/e, 80/20 fitting don't fit.

Or build a wood stand.

 

[Blue Ring Octopus]

If the stand is similar in dimension it will be strong enough, watch one of their videos when they stacked a bunch of stuff on one of their stands. If the tank is bigger put a bigger piece of wood on it.

 

[mcwhng]

Well if the 120 is actually 48" no, now if its ty he following diamesions I would think ,actual stand dimensions according to them is 47.44 x 23.82. I can get actual measurements in am.

If you want an aluminum stand go with 80/20 , no back ,sides are w/e, 80/20 fitting don't fit.

Or build a wood stand.

I actually contacted IM directly since the dimensions of a 120 are about 1/2 inch deeper and longer than the stand and they would not confirm or deny that a 120 would fit on the stand. I would think placing a 3/4 inch sheet of plywood on top would be more than enough support for a 120 since standard 120’s without their plastic rims are about the same size as the stand.

 

[mcwhng]

I actually contacted IM directly since the dimensions of a 120 are about 1/2 inch deeper and longer than the stand and they would not confirm or deny that a 120 would fit on the stand. I would think placing a 3/4 inch sheet of plywood on top would be more than enough support for a 120 since standard 120’s without their plastic rims are about the same size as the stand.

80/20 stand would be ideal but they cost almost double the APS and the APS is in effect an APS stand.

 

[mcwhng]

80/20 stand would be ideal but they cost almost double the APS and the APS is in effect an APS stand.

Sorry 80/20 stand

 

[mcwhng]

Actually folks I just went on framingtech site and they have a new heading called solutions where they have diy kits for-wait for it-aquarium stands of multiple sizes! Somebody has been listening to us reefers!

 

[BZOFIQ]

Actually folks I just went on framingtech site and they have a new heading called solutions where they have diy kits for-wait for it-aquarium stands of multiple sizes! Somebody has been listening to us reefers!

I got a stand from Framing Tech few weeks ago; worked with Anthony. Couldn't be happier with the process and the profiles I received look super solid. I have some family over until after labor day so I had to put off assembly; I'll post pics once all done. Can't wait.

Here are some drawings for 82 x 32 x 46" (yes 46" tall!!!)