IM40 - replacing return with Sicce Syncra 2.0 - Need help?!

Richmond

Well-Known Member
View Badges
Joined
Jul 28, 2013
Messages
635
Reaction score
570
Location
Richmond, VA
Rating - 0%
0   0   0
Hello! I bought a replacement return pump, as the stock one has started making more noise than I'm happy with and I'd like a little more flow.

I unpackaged the Sicce and noticed that the two return nozzle options are much larger than the return hoses in my tank. What's the best way to adapt this? I've seen a lot of people with this tank have used the Sicce pump but nobody mentions how.

Thanks in advance!
 

Highgrade

2500 Club Member
View Badges
Joined
Nov 19, 2014
Messages
2,884
Reaction score
2,416
Location
Arizona
Rating - 0%
0   0   0
I've been tempted myself to make the jump to the sicce but have heard it's a super tight fit.
 
OP
OP
R

Richmond

Well-Known Member
View Badges
Joined
Jul 28, 2013
Messages
635
Reaction score
570
Location
Richmond, VA
Rating - 0%
0   0   0
The fit seems about the same as stock pump. I still need some feedback on how people running this setup have connected the pump to their return plumbing.
 

Esage

Valuable Member
View Badges
Joined
Sep 12, 2012
Messages
1,281
Reaction score
359
Location
Knoxville, Tn
Rating - 0%
0   0   0
Get a insert. Y Fitting - 3/4 inch Insert x 1/2 inch Insert x 1/2 inch Insert.
 

Tokash23

Active Member
View Badges
Joined
Oct 3, 2014
Messages
498
Reaction score
286
Rating - 0%
0   0   0
What size is currently on your tank for the return? Is it soft or hard pluming? What size is the outlet on the return pump? Sort of going through the same thing, have a mag 7 that i was going to be hooking up to my tank and hard plumbed everything to fit and then i dont like the mag 7 (too loud) so i am returning for a different pump and will no doubt be a different size outlet than what i already have plumbed in place.
 

Esage

Valuable Member
View Badges
Joined
Sep 12, 2012
Messages
1,281
Reaction score
359
Location
Knoxville, Tn
Rating - 0%
0   0   0
The IM 40 uses 1/2 inch soft tubing. The easy solution when upgrading to the sicce 2.o, which uses a 3/4 outlet, is use 3/4 soft tubing to a 3/4 inch Insert x 1/2 inch Insert x 1/2 inch Insert.
 

Tuco Benedicto

Community Member
View Badges
Joined
Feb 23, 2017
Messages
80
Reaction score
34
Rating - 0%
0   0   0
All I did was get a pvc bushing at Lowe's that screws into the female opening of the sicce pump and then used the barb fitting that came with the IM pump and screwed that into the bushing. You will have to trim down the return tube before the Y because the sicce pump sits higher.
 

Tuco Benedicto

Community Member
View Badges
Joined
Feb 23, 2017
Messages
80
Reaction score
34
Rating - 0%
0   0   0
ea2a96fe3a02fb324a41a7f2b1fd3b5c.jpg
 

TOP 10 Trending Threads

WHAT AMOUNT OF LIVE ROCK AND SAND SHOULD BE PRIORITIZED FOR OPTIMAL BIODIVERSITY/FILTRATION?

  • 100% live rock + bagged sand

    Votes: 34 27.9%
  • 100% dry rock + 100% live sand

    Votes: 42 34.4%
  • 50/50 live/dry rock, 50/50 live/bagged sand

    Votes: 27 22.1%
  • 75% live rock, 25% live sand

    Votes: 11 9.0%
  • 25% live rock, 75% live sand

    Votes: 8 6.6%
Back
Top