- Joined
- Mar 1, 2019
- Messages
- 205
- Reaction score
- 333
I am currently building a stand for my 100G reef-ready tank(72x18x17), for those of you who might be unaware of my thread build. I was hoping that some of you gracious carpenters and woodworkers might be able to chime in on some thoughts or advice.
I designed everything to be put together with Titebond III Ultimate Wood Glue, along with pocket hold joinery with the use of 2 1/2” coarse thread Kreg screws.
I plan to put 3/4” plywood on top. I will use 1/4” plywood for the flooring and to wrap it in. I appreciate any advice or help!
I designed everything to be put together with Titebond III Ultimate Wood Glue, along with pocket hold joinery with the use of 2 1/2” coarse thread Kreg screws.
I plan to put 3/4” plywood on top. I will use 1/4” plywood for the flooring and to wrap it in. I appreciate any advice or help!