Just shut down the return pump, I will give it the time to see what happens.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
still no joy
Fallback OFFCan you post the program that you are using now? There are quite a few different things posted above, so I’m not sure exactly what you are using.
That is very interestingJust inserted this exact program and my outlet stays on ON.
mine was set to enabled, i changed it to disabled. should i restart the apex?Actually, one other thing that it may be. In fusion, if you click the gear icon, then click the wrench icon and scroll down you want to check to make sure that you have power monitor set to disabled. If that is enabled and you don’t the accessory AC adapter plugged into your apex brain then it will think the power is off and the If Power Apex OFF command will keep the skimmer off all the time.
That power monitor option would be used if you have your energy bar on a UPS. In that case you can use an AC adapter connected to your apex brain that would be plugged into a non battery backed up outlet, so the apex would know that the power is off even if the energy bar still has power. But if you don’t have the AC adapter and you have the option enabled then the apex will just always think that the power is off.
mine was set to enabled, i changed it to disabled. should i restart the apex?