Is this a bad idea. Plumbing overflow help

[DaneGer21]

I want to convert a stock overflow box to have an emergency standpipe for piece of mind I plan on using the old return hole as the drain and keeping the factory durso drain. Ile hard plumb the return over the edge of the glass see attached photo for diagram

This is exactly what I did to my old tank. Used both as drains, and ran the returns up and over the back.

Not a single drain issue in 11yrs on that tank. Worked great for that setup.

 

[Kingsley_Reef]

This is exactly what I did to my old tank. Used both as drains, and ran the returns up and over the back.

Not a single drain issue in 11yrs on that tank. Worked great for that setup.

Pics or it didn’t happen lol

 

[Dburr1014]

I have also considered this……I have no experience with herbies but I’ve hear they are a bit of a pain the get setup properly

It's the same thing as your diagram but you would use a gate valve.

 

[Lbrdsoxfan]

It's the same thing as your diagram but you would use a gate valve.

Gate valve is a must on a primary drain with a herbie.

 

[Kingsley_Reef]

Let’s see if I got this correct

 

[ScottD]

Take a look at @Vivid Creative Aquatics. They have a 134 gallon cube that uses a reverse check valve on returns that go through the back of the tank. You could do this as well with your return design over the top if you’re feeling adventurous.

Thread '134-Gallon Cube Build - Random Flow Generator® Powered Mixed Reef - Lots of Pics!'
https://www.reef2reef.com/threads/1...ator®-powered-mixed-reef-lots-of-pics.846184/

 

[Dburr1014]

Let’s see if I got this correct

Flip those around.
3/4" bulkhead will be the main with a gate valve.
1" will be your emergency.

Will be surprised how much flow you can get through a 3/4" bulkhead with a gate valve at full siphon. And the emergency should be able to handle the water if for some reason the main gets clogged.

 

[Kingsley_Reef]

Flip those around.
3/4" bulkhead will be the main with a gate valve.
1" will be your emergency.

Will be surprised how much flow you can get through a 3/4" bulkhead with a gate valve at full siphon. And the emergency should be able to handle the water if for some reason the main gets clogged.

??? I’m confused isn’t that exactly what I have drawn?

 

[Lbrdsoxfan]

Let’s see if I got this correct

Looks good to me.

 

[Dburr1014]

??? I’m confused isn’t that exactly what I have drawn?

Oops, I'm sorry. You are correct. To much egg nog last night. LOL

 

[Kingsley_Reef]

Thanks for all the help guys Ile start a build thread soon if anyone is interested I’m sure I could use more advice down the road

 

[DaneGer21]

Pics or it didn’t happen lol

That tank was sold 5yrs ago

 

[Kingsley_Reef]

That tank was sold 5yrs ago

No problem I was just messing around

 

[GlassMunky]

Let’s see if I got this correct

There’s no need to have the reducers. Just use 3/4” pipe the whole way
You’re not gaining any flow by going up to 1”

Also you will need to lower the standpipe for the full siphon.
Personally I wouldn’t even have a pipe at all and just an overflow strainer

 

[GlassMunky]

https://www.bulkreefsupply.com/low-...rfgp16h_jQbP-ObJiwCVlIkWU2oSY0DhoCXr0QAvD_BwE