Is this level enough?

[Ross B Reef'n]

No. Has a canopy.

Great looking tank and stand!! Makes me a little jelly. Fill'er'up!

 

[lapin]

My rule of thumb is put 1" to 2'" of water in the tank. If you have a noticeable difference Lets say 1/8th of an inch from front to back or side to side then shim it.
I also do not like crooked pictures on the wall

 

[Scooter90254]

All depends on the length of the level. If that’s a torpedo you’re in deep trouble. Lol

 

[Ross B Reef'n]

You will find most levels are off by more than you show there.

I tried to use a 4ft level as a straight edge to check the flatness of my jointed boards once... ruined quite a few boards only to find out the level wasn't actually... flat/level

 

[KorD]

Ok. Thanks all! Will shim!

Can 4 or 5 of you come over and help me lift this thing?

I could be there in two hours.
But I require beer!

 

[MnFish1]

Ok. Thanks all! Will shim!

Can 4 or 5 of you come over and help me lift this thing?

Curious - I'm assuming that this is with 'water inside'? Did you level the stand first? and then put the tank on? Is the stand on bare floor or carpet? Is there another mat or something like that between the tank and stand?

btw - my vote was 'fill er up' - but - were it me - I would ask planet aquariums the best way to level 'their' stand....