Kessil a160we for fluval flex

  • Thread starter Thread starter wotis11
  • Start date Start date
  • Tagged users Tagged users None

wotis11

Active Member
View Badges
Joined
Nov 4, 2020
Messages
102
Reaction score
61
Location
Syracuse
What state or country do you live in
New York
Rating - 0%
0   0   0
I have a fluval flex 15 and I am using a Kessil a160we over which is mounted at 8” above the water line. I’m using a vdm module to control it with my apex and was wondering what everyone thought about the intensity I should set it to. So far I have a gonipora on the sandbed and a hammer about 3/4 of the way up. I am going to put mostly lps in it with maybe a couple sps at the top. If someone could help me out with a lighting schedule I would really appreciate it. Thanks
 
I have a fluval flex 15 and I am using a Kessil a160we over which is mounted at 8” above the water line. I’m using a vdm module to control it with my apex and was wondering what everyone thought about the intensity I should set it to. So far I have a gonipora on the sandbed and a hammer about 3/4 of the way up. I am going to put mostly lps in it with maybe a couple sps at the top. If someone could help me out with a lighting schedule I would really appreciate it. Thanks
on a 20g long, i have the same light. i have two, but at the time that i did par readings, i had one. below is the par readings that i had with that one, at highest level. so, directly under, 18 inches from the lens to teh sand.
if you wanted to do SPS, you should be okayish right under the light, but you will have to keep it toward the top of the scape. i say okayish because if you have an sps that requies 250 or more, then its definately a no. but if you are getting one that can do fine at 180-200, i think you might be alright. it might be a little iffy, so just throwin that out there. you will definately want to get the light closer to the water to be better off

20gal.jpg
 
on a 20g long, i have the same light. i have two, but at the time that i did par readings, i had one. below is the par readings that i had with that one, at highest level. so, directly under, 18 inches from the lens to teh sand.
if you wanted to do SPS, you should be okayish right under the light, but you will have to keep it toward the top of the scape. i say okayish because if you have an sps that requies 250 or more, then its definately a no. but if you are getting one that can do fine at 180-200, i think you might be alright. it might be a little iffy, so just throwin that out there. you will definately want to get the light closer to the water to be better off

20gal.jpg
How close are you thinking? 6” or closer than that?
 
well, i would go no further than 6 inches. its really hard to say without testing par. my light is 8 inches from the top of the water, and at the bottom of the tank, it gets 130ish. i would say that you would probably get about 200 to 225 ish
at the top of the water 6 to 8 inches
 
well, i would go no further than 6 inches. its really hard to say without testing par. my light is 8 inches from the top of the water, and at the bottom of the tank, it gets 130ish. i would say that you would probably get about 200 to 225 ish
at the top of the water 6 to 8 inches
 
I will lower it then to 6” and I’ll have to check it with a par meter. Thanks
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 11 37.9%
  • I’d trust someone who knows my tank to choose

    Votes: 0 0.0%
  • I’d rather get a gift card and pick it myself

    Votes: 10 34.5%
  • I’d prefer gear or supplies instead

    Votes: 0 0.0%
  • Please don’t surprise me with livestock

    Votes: 8 27.6%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new