Kessil A360 with Season Table

AV8R · Apr 17, 2020

Hey guys, so I posted on the Neptune Forum but I haven't gotten any replies. I'm hoping someone can help me with this. I have been doing some reading on the season table and I am still very confused. I went in and updated my season table already. Now I am trying to program the lights. I have two sunrise profiles and two sunset profiles for both spectrum and intensity. I want INTENSITY1 to start at sunrise and then have INTENSITY2 immediately follow. After ramp up, I want there to be a "noon period." I then want INTENSITY3 and INTENSITY4 to start 5 hours and 18 mins before sunset... Basically on the shortest day of the year, the lights will ramp up, and then ramp right back down. I want the "noon period" to stretch as the days get longer... I have racked my brain trying to figure this out. Can anyone help me with the coding? I don't understand the 000/000 and what to put the numbers as.

GoVols · Apr 19, 2020

How-To Guide: Using the Season Table for primary and moon lighting with Acan Prism LEDs, including Weather events

This advanced sample code is intended for use with Acan Lighting's Prism LED fixtures. These fixtures are Apex-Ready+, and can be fully controlled by an Apex via the AI interface on the VDM. This sticky was further revised in Dec 2013 - Apex firmware 4.31 or greater is now required; this...

forum.neptunesystems.com

Review My Program: Using Season Table with Kessil A360

Ok I copied and edited a posted program from another thread ... I have 2 A360s spaced about 22-23" apart on a 4' 85 gallon tank. Full mixed reef. Lights are mounted on arms 11.5" above the water line and water is 12.5" deep. I'm getting good color and a fair amount of growth (with my old...

forum.neptunesystems.com