Kessil A360X Tuna blue

[Zgraggen Bruno]

Hello, everyone I have replaced my 1st generation Philips Coral Care with two Kessil A360X Tuna blue. can you show some of your settings there Greetings from Switzerland

 

[blaxsun]

Decided not to go for the Coral Care 2?

 

[Brymac1]

I am running mine all channels 100%

 

[minus9]

Pick a color setting that you like visually, then set your ramp times (up/down). I would run a 6-8hr peak time and use 100% violet during peak hours. I would keep red and green below 15-20% if you use them?
Kessil logic will optimize the channels for you when picking your color, so you’ll always have the right spectrum no matter what color % you use. My personal preference is 25-50% color range. But if you supplement them with bars or T5’s, then you can run them a little whiter.

 

[Zgraggen Bruno]

Decided not to go for the Coral Care 2?

yes because of the curl effect, which is completely absent

 

[areefer01]

View this thread (below). May have what you want but also as I'm sure you already know spectrum taste is related to each hobbyist. Kessil does a great job making sure a base spectrum is present for healthy corals while allowing us to tune it a bit by the base spectrum and intensity knobs. You can unlock more using their wifi dongle or controller.

And if you have an Apex by any chance I would highly recommend buying the wifi dongle and using the Kessil to Neptune IOTA for control via the Apex. Works great and is an amazing quality of life improvement.

All the best.

https://www.reef2reef.com/threads/kessil-a360x-lighting-schedules-thread.525261/post-5473064

 

[Zgraggen Bruno]

YES thank you ;Smuggrin

 

[Harold999]

yes because of the curl effect, which is completely absent

Yes it's a new thing, shimmerfree tanks. I run a Kessil A360X and i mimick a shimmerfree tank twice a day for about 10 minutes (all pumps in feed mode = no shimmer).