Kessil AP700 dimensions

[helwrj28]

I'm looking at mounting an ap700 with the a series arms, what are the dimensions of the ap700? I have a custom lid and the space between the two arms is 16.5 in... Will I be able to mount this light appropriately with that space?

 

[Mrod]

 

[helwrj28]

Thanks but I need to know exactly where the holes are for mounting

 

[Mrod]

On each side length wise you have a set 2.25” and 8” form the ends

they are about 1.5”, maybe a tad less from the sides width wise if that makes sense

hope this helps a little to see if you can work out your idea

 

[helwrj28]

On each side length wise you have a set 2.25” and 8” form the ends

they are about 1.5”, maybe a tad less from the sides width wise if that makes sense

hope this helps a little to see if you can work out your idea

So you're saying that the screw hole is about 2.25 inches from both ends on the length side? That would leave about 15.5 inches in between the screw holes which is less than what I need.. there's no range for hole positions on that length side?

 

[Mrod]

What about the holes that are 8” from the edge, do they help you?

 

[helwrj28]

Thanks for the pic! I think the other holes are for overhead/canopy mount