Kessil Controller X / a80 combo

ExplosivPENGWIN · Dec 13, 2021

Hey everyone, I recently bought the Kessil Controller X for my A80 light. It is all plugged in and I have been messing with it for a while. My problem is that the controller doesn't recognize the lamp but it still makes it change color and intensity when I mess with the settings. I have created a schedule and it flows through it but when I let it sit, it'll change back to whatever the knobs are set to. It is also not in demo mode either. What am I missing? Thanks!

Reefing Madness · Dec 15, 2021

flyingscampi · Dec 15, 2021

The A80 won't be recognised by the controller, you need an 'X' light connected to the K-Link port for that to happen. You control the A80 under the legacy '0-10v' section of the controller settings.

UnIoNjAcK · Jan 7, 2022

flyingscampi said:
You control the A80 under the legacy '0-10v' section

Hi Flyingscampi , im having the same issues whats the legacy 0-10v section , thats within the controller menu ?

UnIoNjAcK · Jan 7, 2022

flyingscampi said:
The A80 won't be recognised by the controller, you need an 'X' light connected to the K-Link port for that to happen. You control the A80 under the legacy '0-10v' section of the controller settings.

Im having the same issue , so the A80 will not work with the spectral controller x , i have connected the 3.5 jack and the controller does not recognise the light , although i can change the lights as the original poster states

thanks for any help

minus9 · Jan 7, 2022

I ran 6 360x's and one 160 via the 0-10v from one controller x without issue. You have to assign the program to the right port. You need to select the program in the 0-10v from the dashboard. Watch this video and go to 18:00 to start the 0-10v sections.

minus9 · Jan 7, 2022

I also created a separate program for the 0-10v light that didn't follow my main lights.

El Reeflero · Feb 25, 2023

Late to this thread. Just now trying to program my Spectal X for the A80. I can't get it! Where and how do I create a program for the 80 and how do I assign it to the 0-10v port??? Help!