Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
hi, we got a used kh director and 2.1 slave... does the kh director need special tubing, or can we just use anything that'll fit? we didn't get any in our set.
thanks!
Use silicone tubing to connect the KH director to the doser. Also the silicon tubing is used for the vent lines.
The line pulling water from the tank needs to be poly. Silicone can collapse and cause problems.
The tubing needs to be 4mm inside diameter.
If you need to replace the tubing on the Doser you need surgical rubber tubing. BRS actually sells the doser tubing as well as GHL USA.
thanks @AZMSGT i'll try this one
DERPIPE Silicone Tubing - 4mm ID 6mm OD Food Grade Flexible Thick for Homebrewing Pump Transfer 5 Meters(16.4ft) Length
How did this tubing work out for you? What did you use for reagent ? Thanks.
I just purchased the kh director by itself and the doser 2.1 master pump by itself since the place I order from was out of the “kit” will I be receiving everything that the kit has or will I not be able to set it up because I’m missing something?@Allytyc
Contact the dealer whom you purchased from. They will arrange to have the tube sent to you. If you purchased direct, provide a copy of the sales receipt in the email.