Carlos@CoralVue
Active Member
Please follow the installation video. You must run the machine at least 5 times in order for it to settle down. Make sure that your KS reagent is properly mixed and not just swirled around.
KH Guardian: Automatic Alkalinity Controller- My Experiences
- Thread starter Rick.45cal
- Start date
- Tagged users None
Please follow the installation video. You must run the machine at least 5 times in order for it to settle down. Make sure that your KS reagent is properly mixed and not just swirled around.
OP
OP
Rick.45cal
2500 Club Member
Did it give you the AC_ERR again? That's an accelerator error.
Carlos@CoralVue
Active Member
The pH probe on the machine is NOT there to read the pH of your salt water. It is there to read the pH of the test solution as the reagent gets mixed in. There are two ways to read alkalinity. One is the human eye detecting a color change but the other is a chemical change where the pH changes from 4.5 to 4.0. Since the machine does not have an optical device (it would be too expensive to make) it uses the pH probe to detect the falling pH inside the testing solution. When the testing solution falls to 4.0, it is the equivalent of changing color from red to blue.
jsker
Reefing is all about the adventure
Super Moderator
Ultimate Member
Reef Squad
Excellence Award
Reef Tank 365
Article Contributor
Hospitality Award
Ocala Reef Club Member
My Tank Thread
Just catching up, boy you have been busy. Any difference the the over all look of the system in the short term?
Yeah AC_ERR. what is the small white agigator?
Carlos@CoralVue
Active Member
Jonathan, please head over to www.coralvue.com/support and submit a ticket. I will be able to get more personal information from you then and we can get this solved right away.
OP
OP
Rick.45cal
2500 Club Member
I've already noticed some visual changes, yesterday my WWC Red Shortcake frag was REALLY red. Everything looks "happier" at this point in time. I really think the KHG caught the fact that I was running chronically low alkalinity.
jsker
Reefing is all about the adventure
Super Moderator
Ultimate Member
Reef Squad
Excellence Award
Reef Tank 365
Article Contributor
Hospitality Award
Ocala Reef Club Member
My Tank Thread
I notice that. I just switch over to a new reagent with my Red Sea alk test and with the new test reagent my reading were alarmingly low. Thank you for doing this thread. I should start my Auto water change by the end of March;)
OP
OP
Rick.45cal
2500 Club Member
Im getting password error for some reason when trying to submit a ticket. And resetting doesn't seem to work also. Can I send you an email?
btw I ran the test 5x and still only got 5.5DKH. I checked the reaction chamber and the small white agitator is there. Hope I haven't got a faulty unit.
02/11 23:13:53 W.135 KS=40D L%0 S%0 AC_ERR KH :5.50
02/11 23:23:34 W.136 KS=40D L%0 S%0 AC_ERR KH :5.50
02/11 23:31:42 W.131 KS=40D L%0 S%0 AC_ERR KH :5.50
02/11 23:37:33 W.133 KS=40D L%0 S%0 AC_ERR KH :5.50
02/11 23:43:21 W.133 KS=40D L%0 S%0 AC_ERR KH :5.50
02/11 23:51:33 W.126 KS=40D L%0 S%0 AC_ERR KH :5.50
OP
OP
Rick.45cal
2500 Club Member
Their support site is a seperate entity from their main website, you you have to sign up seperately on it and set a password, then you can login ;)
Carlos@CoralVue
Active Member
You can always send an email to [email protected] and it will automatically create a ticket for you.
Yep did that. But also giving password errors. Guess its not my day!
Ok thanks . I sent you an email anyways.
I have Guardian Velcroed to the wall of my Red Sea Reefer. Is this a problem? I see there is P: Stand_Shake Sys: AC_ERR. Does the whole thing have go shake?
Last KH: 9.90 pH: 7.69
CKI=240 NT: 231 min W: 161 AutoMode: 1
P: Stand_Shake SYS: AC_ERR!
L.Time: 01/13 04:41:15 C.Time:02/12 00:00:23
Last KH: 9.90 pH: 7.69
CKI=240 NT: 231 min W: 161 AutoMode: 1
P: Stand_Shake SYS: AC_ERR!
L.Time: 01/13 04:41:15 C.Time:02/12 00:00:23
Carlos@CoralVue
Active Member
Yes, you need to make sure that there is enough space between the wall and the unit so it can vent properly. Otherwise, the unit will overheat and it will affect the performance in the long run.
Sent you the pic. Its missing the Tynelol or white pebble.
OP
OP
Rick.45cal
2500 Club Member
Good to know!
For anyone that is wondering, mine is fastened to one of my bulkheads above my filtersocks with a stick on cable tie holder and cable tied around the the downpipe. (It works perfect for me, and It's easy to remove if I need to).
These are what I used (I took a picture of a smaller cable tie so it would fit in the picture, but you get the idea)
For anyone that is wondering, mine is fastened to one of my bulkheads above my filtersocks with a stick on cable tie holder and cable tied around the the downpipe. (It works perfect for me, and It's easy to remove if I need to).
These are what I used (I took a picture of a smaller cable tie so it would fit in the picture, but you get the idea)
It has enough clearance. I can't find the white magnet. Its not in the box. Please see my email.
Ok so it turns out I was missing a white magnet/agitiator in the reaction chamber that was giving me false readings.
Last KH: 9.90 pH: 7.69
CKI=240 NT: 231 min W: 161 AutoMode: 1
P: Stand_Shake SYS: AC_ERR!
L.Time: 01/13 04:41:15 C.Time:02/12 00:00:23
Carlos was quick on the case and will be sending me out one on Monday.
Kudos to great customer service from CoralVue. Looks like I have to wait few more days to test this gadget!
Last KH: 9.90 pH: 7.69
CKI=240 NT: 231 min W: 161 AutoMode: 1
P: Stand_Shake SYS: AC_ERR!
L.Time: 01/13 04:41:15 C.Time:02/12 00:00:23
Carlos was quick on the case and will be sending me out one on Monday.
Kudos to great customer service from CoralVue. Looks like I have to wait few more days to test this gadget!
Similar threads
TOP 10 Trending Threads
-
- Question
-
- Sticky
