Klir Filter Review.

[RobB'z Reef]

question is directed to you.
you had mentioned that you were waiting for the sump to arrive and will be running a klir filter on it, correct?

yessir, it has not arrived, I expect it to be here in the next week or two. I will be attempting to run two Klir-7's in it.

 

[gparkford]

I was having problems with the motor running the whole spool due to bubbles on the sensor. I realized that the acrylic of the filter stand was touching the glass of the sump so I spaced them out - problem solved. I think it was getting some sort of refraction / reflection that was tricking it out.

 

[Trailermann]

I have also been runing a klir 7inch on my 220 waterbox standard sump. is anyone using a klir auto roller on a bashsea sump?

Yes, I made some simple modifications to the Bashsea sump and the set up works well. Let me know is you want photos.

 

[RobB'z Reef]

question is directed to you.
you had mentioned that you were waiting for the sump to arrive and will be running a klir filter on it, correct?

 

[Trailermann]

I will take some photos hopefully today

 

[Trailermann]

Klir and Bashsea sump photos. It looks like Rob.bucek and I both trimmed the top plate to slide in the Klir. Here are some photos of the corners I cut out of the circular opening of the top plate. Also shots of the sump and the Pax Bellum ARID N24 with the calcium reactor packed in behind it. Also, you can see the AquaUV 25W Classic sterilizer. The return flow goes 100% through the UV at a rate of 520 gph.
Tank has finished cycling and is currently maturing slowly before adding life and lights.

 

[RobB'z Reef]

Klir and Bashsea sump photos. It looks like Rob.bucek and I both trimmed the top plate to slide in the Klir. Here are some photos of the corners I cut out of the circular opening of the top plate. Also shots of the sump and the Pax Bellum ARID N24 with the calcium reactor packed in behind it. Also, you can see the AquaUV 25W Classic sterilizer. The return flow goes 100% through the UV at a rate of 520 gph.
Tank has finished cycling and is currently maturing slowly before adding life and lights.

Haha brotha, exactly! I tried to communicate that to him ahead of time but I failed. I honestly will own that. He isn't familiar with klir's and I failed to articulate the cut out. Fortunately it was a simple fix. Literally applied painters masking tape around the unit as it sat on top flush and used a 21 tpi jjig saw blade. Looks factory install and quite functional. I talked with Steve from Bashsea at length on this via phone. He's Interested in learning more about supporting klir's. In the end it works and still looks good.

 

[125mph]

I've got one of these synergy reef cl-44 sumps.. anyone know if I could fit a klir 4" filter in this ?

 

[125mph]

Yes, I made some simple modifications to the Bashsea sump and the set up works well. Let me know is you want photos.

How did you cut the sump acrlyic? I'm thinking about doing similar to my Synergy Reef sump.

 

[Trailermann]

Can't remember exactly. Might have used a dremel with abrasive cut off disc or a die grinder with a fine carbide bit. Tape the outline first and follow up with a fine hand file.

 

[RobB'z Reef]

How did you cut the sump acrlyic? I'm thinking about doing similar to my Synergy Reef sump.

Jig saw blade works great, 12-14 tpi

 

[125mph]

Anyone know why CoralVue lists the price of the 4” model as $199 but everywhere has it at $249?

i cant seem buy direct from coralvue.

 

[RobB'z Reef]

Anyone know why CoralVue lists the price of the 4” model as $199 but everywhere has it at $249?

i cant seem buy direct from coralvue.

Can't say why they post what price they do, but as far as I know you can only order replacement parts for the Klir's direct from them with the exceptions of some open box products. I lost some rubber plugs and i needed the 'Y' cable and they were shipped fast and cheap. I assume coming straight from CoralVue that those would work just fine and the prices are really low. If I needed another one I'd buy these in a heart beat.

Search results for: 'klir' | CoralVue

CoralVue is one of North America's largest distributors of marine and freshwater aquaria products and represents a wide range of industry-leading brands including Reef Octopus, Abyzz, Fauna Marin, IceCap, and more. CoralVue also manufactures the HYDROS Control, which is the fastest-growing...

www.coralvue.com

 

[125mph]

Sweet! Thanks for that link. I just ordered two of the 4" open box.. Suppose to be new never used with the improved motor.

 

[myakuel]

can always jigsaw to make it fit

 

[125mph]

I have a jigsaw.. but isnt it too big and messy with the jigsaw? I think it may be easier to use a dremel but not really sure. I think I only need to make minor corner cuts.

 

[RobB'z Reef]

I have a jigsaw.. but isnt it too big and messy with the jigsaw? I think it may be easier to use a dremel but not really sure. I think I only need to make minor corner cuts.

Who cares about messy, you have a tenth of the hand control over a dremel vs a jig saw. You can vacuum up chips but you can't fix a sloppy cut. FYI, they both remove the same amount of material so neither will produce less chips or mess.

 

[125mph]

This is what I need to cut. But my sump cant be moved, its in the cabinet and cannot be moved out due to wall clearance. I do have a jig saw but will have clearance problems when I get to the other side, which has some 1.5" pipes.

 

[125mph]

Full view.. I think I may be able to have the clearance as long as I can twist that red valve out of the way. Okay I will do it your way, the jig saw!

 

[125mph]

Need some quick help. I'm trying to install the two KLIR 4".. How do i set up master/slave mode? Do i need a y-splitter?

I have 2 sets of senors, 2 motors, 2 controllers... what do I plugin and how?