velcro_strap_bracket by Kyl, on Flickr
+
velcro_straps by Kyl, on Flickr
=
velcro_strap_bracket_prototype_sizing by Kyl, on Flickr
It might not look like much and a with a lower print quality with prototyping settings, but I'm kicking myself for not doing this type of thing long ago. These are going to make cable management much easier for the power cords. Working on a universal (to a point), power brick mount using the same tie straps next, there's like 7 bricks to secure .
The rest of the cabinet is almost done, some final construction for the dosing vessel platform and then routing all the wiring and tubing remains. Dug out my old airline clips and need to make a surface mount version that will hold them in place but allow them to be snapped out easily. I'm hiding most of the electronics behind the false wall except for the return and gyre for now, possibly the ATO as well. To keep things somewhat reasonable the tubing will have to be removed , vessel moved, etc to access the power area for the future, but how often do you need to plug or unplug something manually in the age of controllers.