adhd_nerd
Active Member
- Joined
- Feb 23, 2012
- Messages
- 244
- Reaction score
- 103
- Location
- Kansas City
- What state or country do you live in
- Kansas
I noticed that my L1 is getting weaker and it has been running a few months (because flap in check valve is not as far open + overflow gets noisy) .
I was wondering if you can tell by the power consumption if something is going bad with the pump. I would expect it to consume more if the impeller was sticking (or flow was restricted). I don't really want to take it apart (pita after only 2 months).
Anyhow, others running L1 can you share your power consumption on the echosmart live screen? Below, mine is running at 80%.
At 100% it looks like about 127.5Watts over the past month.
Speed & Power used.
TIA
I was wondering if you can tell by the power consumption if something is going bad with the pump. I would expect it to consume more if the impeller was sticking (or flow was restricted). I don't really want to take it apart (pita after only 2 months).
Anyhow, others running L1 can you share your power consumption on the echosmart live screen? Below, mine is running at 80%.
At 100% it looks like about 127.5Watts over the past month.
Speed & Power used.
TIA
