Lasse
10K Club member
View Badges
Ultimate Member
Reef Squad
Excellence Award
Reef Tank 365
Reef Of The Month
R2R App User
Article Contributor
My Tank Thread
Around 3 weeks ago I run in to some problem with my water supply below the DSB. I used a dosing pump. Water from the sump pumped up to the inlet for the plenum. The tube came off and the check valve did not work – water on the floor. It happens tvice!!!
I decided to reconstruct the water supply of the plenum. I got a very small adjustable DC pump and I installed it in the refugium – no tubes outside the aquarium!!!
In order to control it – I will in the beginning use a cyclic timer – wait 5 minutes – run 1 minute. I have adjust the flow to 100 ml/minute. The Profilux has 16 dedicated dosing pumps functions. I took one of these functions and connected it to the index of the outlet I use. Filled up (virtual) 30 000 ml. Put in my calibration figures and now I can see how much water that flow through the sand bed. Later on I will manage the flow through the redox electrode
Pump
Connection to the inlet of the plenum
Overview
Sincerely Lasse
I decided to reconstruct the water supply of the plenum. I got a very small adjustable DC pump and I installed it in the refugium – no tubes outside the aquarium!!!
In order to control it – I will in the beginning use a cyclic timer – wait 5 minutes – run 1 minute. I have adjust the flow to 100 ml/minute. The Profilux has 16 dedicated dosing pumps functions. I took one of these functions and connected it to the index of the outlet I use. Filled up (virtual) 30 000 ml. Put in my calibration figures and now I can see how much water that flow through the sand bed. Later on I will manage the flow through the redox electrode
Pump
Connection to the inlet of the plenum
Overview
Last edited: