Lighting question.

beginnerreefer04

Community Member
View Badges
Joined
Sep 11, 2023
Messages
95
Reaction score
27
Location
denver
Rating - 0%
0   0   0
Hello, I have two ai hydra 32’s and I’m running a mixed reef. My tank is a 36x24x24 I am wondering what level I should set my lights at. I am going to rent a par meter but until then where should I be sitting.

image.jpg
 

Fish Styx

In Cod We Crust
View Badges
Joined
May 10, 2020
Messages
5,766
Reaction score
29,910
Location
Washington, DC Metro
Rating - 100%
1   0   0
Hello, I have two ai hydra 32’s and I’m running a mixed reef. My tank is a 36x24x24 I am wondering what level I should set my lights at. I am going to rent a par meter but until then where should I be sitting.

image.jpg
The manufacturer's reccomended height for the Hydra 32 is 8 -10" above the waterline. The picture and my old eyes make it difficult to see if there is coral in your tank. If there is, I would move them down slowly so that you don't shock anything and adjust the intensity accordingly.
 
OP
OP
B

beginnerreefer04

Community Member
View Badges
Joined
Sep 11, 2023
Messages
95
Reaction score
27
Location
denver
Rating - 0%
0   0   0
The manufacturer's reccomended height for the Hydra 32 is 8 -10" above the waterline. The picture and my old eyes make it difficult to see if there is coral in your tank. If there is, I would move them down slowly so that you don't shock anything and adjust the intensity accordingly.
They are mounted exactly 14 inches above the water line. This was tested to be the most even spread of light for the hydra 32 by brs. I do have corals I have one Acan and another sps can’t remember the name and have created a collection of lps and zoas. I had them at 30% as to not burn anyone since I haven’t had a par meter. Considering everyone has said 60-75% I have moved them to 50% for tomorrow I will rent a par meter soon
 

Enchanted Reefs

Active Member
View Badges
Joined
Jul 27, 2019
Messages
438
Reaction score
375
Location
Rio Rancho
Rating - 0%
0   0   0
They are mounted exactly 14 inches above the water line. This was tested to be the most even spread of light for the hydra 32 by brs. I do have corals I have one Acan and another sps can’t remember the name and have created a collection of lps and zoas. I had them at 30% as to not burn anyone since I haven’t had a par meter. Considering everyone has said 60-75% I have moved them to 50% for tomorrow I will rent a par meter soon
You seem to have a ton of light spillage though. Did brs have the exact same tank as yours? Other wise I would lower them. Your tank seems pretty tall and the rock is pretty down low I don’t think you will have an issue if you lower them. I keep my lights 8” above the surface for the purpose of minimizing light spillage and having the light blasting my eyes because I personally find it quite annoying
 

Making aqua concoctions: Have you ever tried the Reef Moonshiner Method?

  • I currently use the moonshiner method.

    Votes: 26 22.6%
  • I don’t currently use the moonshiner method, but I have in the past.

    Votes: 2 1.7%
  • I have not used the moonshiner method.

    Votes: 83 72.2%
  • Other.

    Votes: 4 3.5%
Back
Top