linking 2 A360x’s

[ChrisfromBrick]

I have an A360x and just got a new one. I believe I can just run a k link cable to the other one’s k link port from the new one with this and run the new one off the existing power supply:

https://www.bulkreefsupply.com/90-degree-k-link-cable-10-ft-kessil.html
My thought was that you link them and they just run off your current power supply as well as your already set up controller via the k link port.

Are these A350’s all supposed to come with a k-link cable in the package? I already have a spectral controller running to my 1 a360x and i don’t see the k link cable in 360 box.

 

[MarineandReef Jaron]

I have an A360x and just got a new one. I believe I can just run a k link cable to the other one’s k link port from the new one with this and run the new one off the existing power supply:

https://www.bulkreefsupply.com/90-degree-k-link-cable-10-ft-kessil.html
My thought was that you link them and they just run off your current power supply as well as your already set up controller via the k link port.

Are these A350’s all supposed to come with a k-link cable in the package? I already have a spectral controller running to my 1 a360x and i don’t see the k link cable in 360 box.

You will need to buy a K-link Cable. One is not included with the light. The cable only communicates control you will still need a power supply for each light.

 

[ChrisfromBrick]

Thanks- already bought one today. So the spectral controller will control both lights the same? Wont throw anything off as soon as I plug in the new light?

 

[MarineandReef Jaron]

The spectral controller will control both lights. Normally it will automatically sync up with the first light. Some times the new light will get put into a different group. You then just add the new light to the first group and it will sync up.

 

[ChrisfromBrick]

thanks so much!