Looking for plumbing solution for AWC waste to house exterior

  • Thread starter Thread starter pianosdr
  • Start date Start date
  • Tagged users Tagged users None

pianosdr

Community Member
View Badges
Joined
Jul 4, 2022
Messages
54
Reaction score
20
Location
Orange County
What state or country do you live in
California
Rating - 0%
0   0   0
Hi,

I am looking for a clean way to run the 1/4“ auto water change waste tubing from my Neptune Dos through the wall to the house exterior in order to route to the outside drain.

I was considering running a length of 1/2” PVC as conduit through the wall (and running the waste line tubing through it), but I’m not quite sure what the best install method would be to do this without essentially just having a bit of PVC sticking out of the interior wall. Is there a better way to secure this pvc to the wall and also possibly a better way to connect the 1/4” tubing to the PVC rather than just simply laying it in the pipe?

Could I drill a hole in the wall for a bulkhead and use one of those BRS bulkhead/push connect fittings to attach to that? I’m assuming if I did this, I would need to cut out a square hole above the bulkhead so that I could screw on the bulkhead from the interior of the wall and then cover up the square hole with a solid cover plate? Does anyone have a better solution than that?

thanks!
 
How do you want it to look from the outside of your home?
Theres tons of options you could think up lol.

Do you have a crawlspace?
 
How do you want it to look from the outside of your home?
Theres tons of options you could think up lol.

Do you have a crawlspace?

Nope no crawlspace. We are on a slab. For the outside, I was just going to drill the 1/2” hole in the stucco, attach a 1/2” flange to the wall, and have the pipe going through the wall, through the flange, and connect to a 90° street elbow to simply drain out the water onto the pavement (it’s the side yard of the house).

The interior house side, however, has me guessing a little bit. I could just attach yet another flange on the interior side and cut the pipe off at the flange and then simply run the waste water 1/4” tubing into the pipe, but that feels a little unfinished to me? Dunno
 
Hi there,
No drain line should be smaller than an inch,
Best way would be to have the waste line terminate into a 2” pvc tundish inside the sump cabinet and reduce to 1” and have a trap (waterseal) under the tundish and run the pvc drain as required out side. Simple elbow on the outside of house facing down and terminating above ground level.
the trap under the tundish stops drafts and bugs climbing up the drain.
Hopes this helps
 
Hi there,
No drain line should be smaller than an inch,
Best way would be to have the waste line terminate into a 2” pvc tundish inside the sump cabinet and reduce to 1” and have a trap (waterseal) under the tundish and run the pvc drain as required out side. Simple elbow on the outside of house facing down and terminating above ground level.
the trap under the tundish stops drafts and bugs climbing up the drain.
Hopes this helps
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 5 14.3%
  • Lighting, pumps, or other major equipment

    Votes: 4 11.4%
  • Controllers, testing, dosing, or automation gear

    Votes: 4 11.4%
  • Dry goods and restocks, like salt, media, or food

    Votes: 4 11.4%
  • Corals! Must...Have...CORALS!!!

    Votes: 8 22.9%
  • Fish or other livestock

    Votes: 1 2.9%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 2.9%
  • I’m browsing, but don’t have a specific target

    Votes: 4 11.4%
  • I’m not shopping for reef deals this year

    Votes: 4 11.4%
  • Other (Post in the comments)

    Votes: 1 2.9%
Back
Top
Home
Post thread…
Market
What's new