Low Magnesium Salt Mixes

ptrick21186

Active Member
View Badges
Joined
Jan 11, 2023
Messages
384
Reaction score
288
Location
Joliet
What state or country do you live in
Illinois
Rating - 0%
0   0   0
So I've been scratching my head trying to figure out where my magnesium has been going the last week. Finally checked my salt mix (Instant Ocean reef Crystals) and properly mixed salt water at 1.025 only comes out to 1230ppm. I like to keep it around 1300ppm. So obviously the problem is is I'm lowering my mag every time I do a WC. So how should I do this then? Should I be measuring the mag levels of my new water, calculating the dosage to bring the level up to my tank level, then adding that into my new water before I add it to the tank? Seems to be the only logical way right?
 
I boost the mag in my io to 1450 when mixing, cal to 450 also. What I’m saying is boost your new salt water
 
So I've been scratching my head trying to figure out where my magnesium has been going the last week. Finally checked my salt mix (Instant Ocean reef Crystals) and properly mixed salt water at 1.025 only comes out to 1230ppm. I like to keep it around 1300ppm. So obviously the problem is is I'm lowering my mag every time I do a WC. So how should I do this then? Should I be measuring the mag levels of my new water, calculating the dosage to bring the level up to my tank level, then adding that into my new water before I add it to the tank? Seems to be the only logical way right?

Just to be clear, that is not a low magnesium mix, even assuming your values are correct. At 35 ppt, that 1230 ppm magnesium becomes 1299 ppm, which is above the ocean average at that salinity.

I would just raise the salinity to 35 ppt (sg = 1.0264).

But, magnesium is also cheap and easy to raise if you want to keep a lower salinity. You can add it to the salt mix, or the tank.

:)
 
Just to be clear, that is not a low magnesium mix, even assuming your values are correct. At 35 ppt, that 1230 ppm magnesium becomes 1299 ppm, which is above the ocean average at that salinity.

I would just raise the salinity to 35 ppt (sg = 1.0264).

But, magnesium is also cheap and easy to raise if you want to keep a lower salinity. You can add it to the salt mix, or the tank.

:)
I guess that makes sense when you put it that way
 
Bumping this up, what about lowering it? I currently have a doser, overdose, and have dumped a lot of mg into my tank. Currently at 1590, which is way too high imo (sudden change of over 200+ ppm killed a few corals). I've been using rpm to settle it down, but I need a salt with lower mg content.
 
Last edited:
bumping this up, what about lowering it. I currently had a dosed dump it into my tank. Currently at 1590, which is way too high imo. I been using rpm to settle it down but need a salt with lower mg content.

Why is 1590 way too high? Maybe not “ideal” but many people have run magnesium at 1600+ before with little to no issues. Just do some 10% water changes and it will bring it down slowly
 

TOP 10 Trending Threads

WHAT MAKES A REEF FEEL ESTABLISHED TO YOU?

  • Stable parameters over time

    Votes: 2 66.7%
  • Consistent coral growth

    Votes: 0 0.0%
  • Fish and inverts are settled

    Votes: 0 0.0%
  • The tank has moved past its ugly stages

    Votes: 1 33.3%
  • It has survived a major setback

    Votes: 0 0.0%
  • At least six months old

    Votes: 1 33.3%
  • At least one year old

    Votes: 1 33.3%
  • Stop worrying about age—it’s about stability

    Votes: 1 33.3%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new